rear airbags and front shock size on 2022

Hey Guys,

I currently have a 2014 with king 2.5s, camburg UCAs and 5000lb airbags in the back in order to carry a snowmobile deck with two sleds on my 2014 double cab. I am looking into getting a 2022 and currently can't find any airbag options for the rear and am wondering if you guys could point me in the right direction if they exist yet? The guys at Wescott designs (that make the spring retainer leveling kit) said that the rear end of these things is almost exactly the same as a land cruiser 200 series, so I could probably put in the in spring airbags but I can only find those up to 1000lb capacity.

Any ideas how to level my load with the sled deck? the deck weighs 250lbs and the sleds weigh 420 each.

Also, does anyone know the shock size for the front? I would love to take my king 2.5s with me...

 

420+420+250=1090. Should be within payload ratings of a 22. If you need it now, I’d think the 1000lb would work. If not, you should be able to get by without any airbags and wait on a better one.

 

Dobinsons will have lift coils for the rear available soon in different spring weights for added weight. Aftermarket air springs should be out soon- reach out to a few of the companies and ask!

 

It will sag too much without help to be safe to drive through the mountains in the winter without some sort of support back there, does anyone know the front shock size of a 22? same as the old tundra?

 

I thought I remember reading in an earlier thread that the front shocks do not match between the 2.5 and 3rd gens?

 

correct, the aftermarket is working on new front and rear shocks as we speak

 

Certain models can be ordered with an auto leveling system

 

Any luck
I preferred some air bags for the land cruiser 200 going to try and install this week

 

Back from the dead, did you get a 2022? Airlift has a bag setup now available. And what deck is only 250lbs, that’s crazy light!