FS: 3 switch panel insert plate

Have 3 batches (12 switch panels) ready to ship and just sent a bunch of PM's with payment info to those on the list. There is 1 still available ready to ship so let me know if you want it.

 

For those 11 of you that have paid and sent me shipping info, I will be printing the labels, sending you tracking numbers here via PM and dropping these off at USPS tomorrow. Thanks again!

Still have 1 left ready for a new home!

 

Last one in the batch has been spoken for. Will print another batch this week to have on hand so if you're interested let me know and I'll put you on the list.

 

Also forgot to mention that yes I will ship to Canada and there are already a few of these up there.

The shipping is higher (around $15US so far to those in Canada I've shipped these to) so these are $35USD shipped to Canada with tracking. Shipping to Canada also requires a phone number for some reason so if you order be ready to give me that as well (or the number to Tim Horton's down the street .. doesn't matter to me). These will be declared with a value of $20USD so any additional customs fees or Canadian taxes are on you.

 

Definitely one of my favorite mods.

 

Need to be on this list to get me one!!

 

Sorry for the delay got caught up with unexpected work the past 2 days but these will be off to you this weekend.

 

All open orders are packed up and ready for drop off at USPS today. 1 insert is available and ready to ship so let me know if you'd like it.

 

I'll take one

 

@abomb60 i have a ton of extra m3 cap screws and flange nuts that I ordered to install my plate (thanks BTW!). Could I send them to you so you could include them in future orders? I ordered a 100 pack of each because I was too lazy and didn’t have much time to go to the hardware store. I have 96 of each ready for your next 24 orders haha. Everyone here could benefit!

 

Yeah if you want to send them to me I can toss 4 in each package to share. Thanks!

 

Got any red ones to match AJT screws?

 

I bought red ones off Amazon. Within about three months they were more of an orange color - the anodize dye on them is pretty cheap and doesn't stand up to UV/sun in a vehicle very well. The AJT ones faired better for me, but I ultimately swapped those out here recently as well.

 

I'm pretty sure @RainMan_PNW posted this somewhere in the other 11 pages of discussion, but for anyone looking for good switches to put in the new panel, here you go:
https://www.aironboard.com/online/p...push-switches.html?color=390&toyota_model=396

 

I would like to order one but I don’t have Facebook. Where can I place an order?

 

Came out cleaner than anticipated!

 

I only have mine dry fit for now, but plan to get it installed this next week with the rear window relocate. Thanks @abomb60 for a great product.

 

I’m not feeling like combing thru 12 pages….has anyone used bondo to fill in the rough surface and sanded smooth? I found a rattle can in TRD red that I think would look pretty nice with a smooth surface.

 

the top is pretty thick. I sanded it down smooth and finished it with 1000 grit.
Self etching primer, and satin paint.

 

Like @biebs96 said, sand-primer-paint will get you a good finished product. You can use some high-fill primer to help a bit if you don’t want to over sand it.

 

https://www.tundras.com/threads/caseys-2021-lunar-rock-trd-pro-build.77317/page-7#post-2065635

Wet sand on a flat surface, prime with a high-build primer, wet sand some more, finish paint

 

Would this fit Otrattw switches? I have a bunch I am looking to use finally and want to install in this location

 

Post up a photo of the switch or a link to what you have. Others will chime in.

if they fit factory blanks, then they will work in this plate.

 

Yea not sure they would fit factory blanks. Here’s what I’m working with:

https://www.otrattw.net/Contura-V-Series-Lower-Independent-Accessory/

 

Nope, those are going to be too big.

 

Worth a shot! Appreciate the info per usual!

 

but… this panel is so perfectly located, you should probably sell three of the switches you have and purchase some that fit and use that space.

 

hah touche! Think I’ll wait for now and see if I come up with anything else!

 

The "Toyota Small" switches from AOB is what you want.

 

I’m in for 2 of these on the next batch please!