Diff Drop 7 inch Bds

My cv axles are angled a bit, would a diff drop help them get back to stock angle?

 

If you have a BDS 7” lift then your CV angle is fine because the diff has already been dropped via the brackets.

 

So the cv axles not being straight is okay?

 

Yes. The purpose of the drop bracket is to lower the diff so that the CV angle is back to stock level.

 

So this looks normal? For a lifted truck.

 

Is there a picture?

 

Here’s the picture

 

I have the exact same lift as you. Same angle as yours. Don't let the CV boot deceive you. Angle of the picture was taken differently as well.

 

Yeah my wheel was turned hard left too in the photo.

 

You got coach builder tie rods?

 

Yes sir. Get yourself some ABS protection as well. With our front end so exposed it's easy for something to get to it. Took off the sway bar. Gusseted the drop bracket. Replaced the LCA. Just a few things

 

Links to these products? Thanks man

 

What do you gain front removing front sway bar

 

ABS sensor guard: https://sdhqoffroad.com/products/sdhq-built-billet-abs-guards
LCA: https://www.polyperformance.com/tot...length-chromoly-boxed-lowers-for-07-18-tundra
I took my drop brackets to a shop to weld on gussets because it would bend at the corners (from hitting big rocks) and the driver side diff mount is prone to cracking

Better articulation for going off road.

 

I just ordered the ABS sensor guards, did you have to remove your wheels to install these? Im trying not to.

 

Nope. Easypeasy.

 

Awesome, appreciate it brother.

 

Did you install your tie rods yourself? if so, I have a couple of questions thanks

 

You could turn your coilovers down to flatten the angles