What have you done to your 2.5 gen Tundra today?

Replaced my broken led fog light bezels and zip tied lights different than I had previously, should eliminate the fog shake permanently. Then I placed an order for DD ss3 max fogs.

 

Gramps got some new shoes today. May have gone a bit too big idk

275/70 18

 

If they don't rub, then there's no such thing as too big.

 

Am I reading this right that you used the interior knob to adjust you headlights? There is a gear at each headlight under the hood that should be used to set proper headlight height; the knob in the interior should be at 0 when making this adjustment—as the interior knob is for adjustments when towing/under load…I guess it works if you don’t need the adjustment capability to just set the dial at a higher number… but if you want the factory functionality, might re-line up with tape at the wall on your current setting, then adjust to zero, and reset height at the headlight housing

 

Love that house.

 

They're not too big until they're pulling off body parts. Looks nice.

 

get that boomer truck out of the 2.5 thread!


Nice kicks tho!

 

ordered Dirty deeds 10" yesterday....

 

PKTUNGRAB - Tundra Grab Handle Kit - | Sparks Parts

I assume. I haven't seen it anywhere else

 

You are gonna love it! Run the same on my truck.

 

https://www.sparksparts.com/p-tundra-grab-handle-kit-pktungrab

 

Tint today. Not up to speed on the latest and greatest in the world of tint, but got something something ceramic something on all the windows along with the front and rear windshields. Front windshield at a full face 35% everything else I just asked that they match, dude said it was along the lines of 20%. Diggin’ how it turned out.

 

Installed cat deterrent plates from Talons Garage.

 

Just installed… some new headlights

 

Ceramic tint is going to change your life, do you know what brand? the best is a German one Huper Optik but the others have been coming up and getting better, you can feel zero heat from the sun in 100 degree weather coming through the glass. You'll find yourself running your AC on high on a hot day for only a short time till the cabin air cools then needing to turn it down and same for winter and heat. I got my tint within the 1st week of purchase based on previous experience. Enjoy !!!!!

 

Took her off-roading... Had to show the jeep how to properly go through a mud puddle.

 

Big week for my tundra:
Abomb’s 3 switch bracket
Kenwood DDR9906xr
Go Rhino RB20 steps
DD SS3 pro fog lights
Anytime front/backup camera
3wLiner 1 touch up/down window module
Automatic locking tailgate

I got to say, I don’t want to see that many wires ever again lol. Glad I went to my parents house and had my dad help (he did a lot) me with wiring. Still have the rear sway bar to do. I’ll throw that on next oil change hopefully before Thanksgiving/snowboard season.

 

Where did you get the decals from?

 

What did each plate cost ya? - if you don't mind me asking

 

That f1shitty looks out of place and outta his league-

 

The NSV usb is also a direct fit for the rear.
https://www.theretrofitsource.com/NSV-Dual-USB-Charging-Port-System-Universal?quantity=1

 

With both plates and hardware included, I paid $590 total with a military discount included.

 

Appreciate the feedback, not up to speed on the Brand of tint used, I could check the warranty info later, I know the shop offers a bunch of options based on budget and what the needs are. Not worried about it now, but those 100° Middle of nowhere Missouri days next summer might change my tune then. Definitely better off now than what it was 12hrs ago.

 

what size lift and wheels ?

 

So, I’m guessing dude in the f-150 was like, “sure, why not”.

 

Didn't do anything physical to the Tundra today but ordered some things so I can do some work.

FRAC harness and cameras-used
Front and rear camera switch
Bumper light bar switch
@abomb60 3 switch block-got on the list
Coachbuilder +3 shackle-used
Stock UCA-used
License plate frames
Black bolts for Bushwacker Flares
Paint protection film for flare reinstallation
Rear window harness extension

 

My ESP Underseat Rear Storage came today. I almost need to grab one of my neighbors Xanax - cutting into the BifMobile is not something I found enjoyable. Unfortunately, I just did a once over of the unit and didn't see the dent and crease on one end. FedEx must have dropped it and taped the box end back together. So if you order one and it's taped at one end only, FedEx probably dropped the damn thing.

ESP was amazing though - they'll be sending out a replacement on Monday. I muscled the other one in because the BifMobile demands to be driven and not parked. So, hopefully next week I'll be posting that I replaced my ESP Storage box.

 

Haha, more or less. He's selling it for an F350 so wanted to send it before it sold.

 

Go with the Valhalla shields. They have been much improved since Talon "appropriated" the Valhalla design. Plus Tyler is a long-time, valued member of this community.
https://valhallasshields.com/
https://www.tundras.com/threads/val...ent-skid-plates-info-and-ordering-post.84911/

 

I currently have Tyler's front & rear plates, and would never consider going any other place- was just curious as to what others was charging for what I would say is a less superior product-