What have you done to your 2.5 gen Tundra today?

not necessarily. What size tire/rim combo? I fit my 35 in the stock location.

 

Not bad at all. Get a corner and carefully remove. Getting them on was a little tougher but just needed to work from the outside inward

 

35x12.50 on a 9in rim, I'll give it shot and see after I get the mount balance and TPMS sensor swap done. Hope you're right, every bit to keep the center of gravity down and not give up bed space is a win.

 

I am running 37 12.5x20. They will not fit under the rig due to interference with the shackles and springs. I purchased the Hi-Lift L Track on AMZN. I have two more rails I will add this weekend that will also fit on the width of the wheel running down the bed. I didn't have time to install them when I did the one rail and wanted to make sure I was safe before heading out on my trip to Utah. I also purchased the Pro Armor Y ratcheting wheel strap.

 

Nice… have a pic and details where you got it?

 

Just took my truck to the dealership for some kind of oil leak, leaking onto the passenger side exhaust manifold. Thought I lost my mind seeing smoke come out of the hvac vents on start up.
Any ideas? 2021 and hit 666 miles driving to the dealer

 

Yea I was eyeing that strap to...thanks for the info.

 

Hopefully spillage? Was the dipstick all the way in? I can't remember which side its on off the top my head.

 

Cam tower leak, couple of threads on that here. I had mine fixed @ 20k miles.

 

I really hope not at less the 1k miles. I’m actually breaking the motor like the manual says so I have been taking it really easy. Bah!

 

yeah doubtful a cam tower on a 2021

 

With a truck that new, i bet it was just spillage or something, can just wipe it and see if it comes back.

 

I agree! I would double check the oil fill cap and dipstick. Then I would wipe everything clean. After all of that, I would take her for a short run around the block and see if the leak is still there. Take a ton of pics and see if you can find where it is originating from before you take it in. This will help the tech and it will also help to CYA... just in case.

GOOD LUCK!

 

Thanks guys. I’ve smelt it for a few days. Had smoke in the cabin the other day and a nice cloud of smoke on the passenger wheel well when I went to lunch today. Just drove it right to the dealer.
ugh I wish I never read about those cam seals….not happy

 

If it ends up being that be happy its happening now instead of after the warranty period like most other manifestations of it.

 

It affects all years of the 5.7. Some leak at 500 miles, some leak at 100k miles. Reading through the cam tower thread, there is no consistency when the leak shows up.

 

I’m in Texas and I thought I’d seen it all! 6” lifts are the majority here.

 

Color matched grill letters

 

Hey... It does suck BUT thank GOD it showed up now and you can get it fixed by Toyota... And I agree with you... WTF?!!? You spend a shit ton of money on a RELIABLE TRUCK and she leaks... UGH...

HA! The Diesel Crews love their 12" lifts!!! Tons of people pulling their Aluminum fishing boats right now too... who knows?

 

https://www.ebay.com/itm/New-Steering-Wheel-Emblem-Overlay-Tacoma-Tundra-4Runner-Rav-4-CRV-For-all-Toyota-/284421982958

Looks like the original listing is gone, but you could look up that seller. Was a below average price with free shipping and came well packaged and the adhesive was substantial.

 

To me that just looks goofy.

 

Almost as goofy as gravy on French fries

 

True, gravy on French fries only works if you have cheese curds as well. For some reason it is delicious!

 

Poutine is one of the finest things Canada has produced for the world…

 

WOAH! COMING IN HOT!

 

New tail lights and also tinted my 3rd brake cover

 

nite shade on the 3rd?? Looks awesome!

 

Only thing I did today was drive it home from the dealer.

 

Good lookin truck

 

It's just black spray paint lol