What have you done to your 1st gen Tundra today?

you live in the slo/pismo area?

 

Details please. I wasn’t aware this was available. Looks very nice.

 

Yes sir no problem, I ran into them on Facebook.

 

Factory Car play is added. Working on modifying the harness to the car solutions any time camera to hopefully retain its functions. If not I’ll be strictly backup camera only I guess.
UI on radio is MUCH nicer to look at since it’s customisable to green.

 

winning

 

Jelly. Should have done more research on it before buying for crackie.... Might need a tail gate first, and a handle.....

Could swap the current head unit into the V6, and then re-buy for crackie... later date.

I'll link this to my ideas thread.

 

Agree here.

 

So got the car solutions unit to turn on. Radio controls and all still function, I can hear the switching relay working. But no backup camera yet. I’ll need to see what’s going on there.

I do know the camera works, 86 owners that have gone to the newer unit that had radio backup cameras say it works. I just might have to give up front and rear cameras

 

I appreciate it bro. I’m really digging every little thing I change on it.

 

Thanks! I used the bluesea systems. Good quality. I was thinking about using that same overhead panel but I needed installed asap.

 

No I live in Oakland.

 

^ this. When it reads quite low and doesn't change with acceleration, thats when the sending unit is likely bad

 

Wheel bearings as well? nice work

 

I put them on a local site. If I still have them next year or next time I'm road tripping I'll put them on here and see if anyone wants to meet up. We make fairly regularly yearly trips to Moscow and sometimes down to southern Utah. I would expect shipping to suck and I'll try to avoid that one.


I just did new Moog widowmaker lower ball joints. My previous set lasted 3 years and didn't really seem bad. I think this set had just a slightly longer threaded shaft or the cotter pin hole was slightly lower because I could actually get one thickness of a thinner pin in there. That was cool because I've been rocking red lock tight and viz torque for two years and it worked, but I'd rather have a mechanical locking device on such a critical nut.

I also just got through a chap stick tube of red lock tite. I thought it just dried up. Nope it was empty. Well... I guess I do use it on lots of stuff.

 

This is on my radar but I've been concerned about the brightness at night. Apparently they fixed these so they "auto-dim" but I plan to mount mine overhead and don't want it too bright. Any thoughts on the brightness at night? Thanks, and sweet truck btw!

 

Saw these power port inserts for the ashtray spots and remembered your post from earlier in the week. I have his overhead switch panel holder. Nice guy, good prices, fast shipping.

 

Does anyone know if there's a mod to make the dash clock brighter in appearance? Especially when you turn on the headlights. I hate trying to read it when I have to drive through rain during the day with them on.

 

It seems bright but only because I don’t have the rest of the decals on but the one that is on is at a good brightness. I noticed it would dim at times I thought it was flickering. Then I found out about the sensor lol. I say it’s good as is

 

Are they stock or fancy headlights?

 

I’ve got this power ports, just haven’t installed them yet. Dude makes an awesome product.

 

My first set of h1 retrofits. They aren't really stock or fancy. I'd say they are a stealth aftermarket set that looks pretty stock, but with projectors.

 

If im gonna have a light bar i might chrome tint my headlights. Because racecar.

 

Finally got my PLX AG gauge installed and wires ran through firewall plug, just need to tap the right power source under dash because was scared of taping headlight socket lol.

 

Finished up one side have other side and then moving on to the rear.

Jba UCA
AcDelco LCA
AcDelco tie rod
TTX LBJ
Bilstein 5100
OME 2885
Maxx sway links
Power steering ploy bushing
Sway bar poly bushing
Diff drop
Cradle support bushing
Cvj boot
ECGS bushing

 

Got the sequoia back. Front end is mostly done. Had king coil overs and front wheel bearings done.

 

What year Sequoia?

 

How do you like the UCAs and King combo?

 

it rides pretty awesome, not to mention the truck just feels overall more stable it skates down the road smooth as silk. We ended up with kings because we got lucky and found them in stock from headstrong Offroad. I’ve kinda got a side by side comparison going since the tundra is running ADS coil overs with total chaos arms and the sequoia with the kings. I don’t have enough miles on either setup to call it one way or another though yet. Both trucks ride excellent.

 

That looks just like LA today! Lol

 

Thank you. These look awesome. Still doing Halloween stuff. Need to post some pics later. Got a bunch done today. But these look perfect.