speaker boxes

I own a 2008 Tundra ( love it) I was wondering if anyone has recommendations for speaker boxes that fit under the back seat. I have two 12 inch kickers im installing.

 

Double cab? Or CrewMax? And whats the air volume for the those kickers? Do you want ported or non ported?

 

Its a sr5 Double cab. not sure about air volume but they are about 10 t0 12 inches from front to back of magnet. needs 2 boxes and would like to have ported.

 

Well will need what the rated/needed air volume is to match them to a box. Do you have the full model numbers on the back of the subs? Can look up the specs on them for air volume.

 

44CWCS124
This is what I found for speaker but I didnt see air volume anywhere
Re 3.82 Ohm electrical voice coil resistance at DC Krm 0.00345 Ohm

WRIGHT inductance mode Erm 0.92

WRIGHT inductance mode Kxm 0.0306 Ohm

WRIGHT inductance mode Exm 0.74

WRIGHT inductance mode Cmes 1011.515 µF electrical capacitance representing moving mass Lces 25.155 mH electrical inductance representing driver compliance Res 86.28 Ohm
resistance due to mechanical losses fs 31.6 Hz driver resonance frequency

Mms 133.823 g mechanical mass of driver diaphragm assembly including air load and voice coil Mmd 119.999 g
mechanical mass of voice coil and diaphragm without air load
Rms 1.534 kg/s mechanical resistance of total-driver losses
Cms 0.1905 mm/N mechanical compliance of driver suspension Kms
5.265 N/mm mechanical stiffness of driver suspension Bl 11.5025 Tm force factor (Bl product) Lambda -0.01

suspension creep factor

Qtp 0.817

total Q-factor considering all losses Qms 17.304

mechanical Q-factor of driver in free air considering Rms only Qes 0.766

electrical Q-factor of driver in free air considering Re only Qts 0.7335

total Q-factor considering Re and Rms only

Vas 75.86815 I equivalent air volume of suspension n0 0.299

reference efficiency (2 pi-radiation using Re) Lm 86.955 dB
characteristic sound pressure level (SPL at 1m for 1W @ Re)
Lnom 87.16 dB nominal sensitivity (SPL at 1m for 1W @ Zn)

rmse Z 2.28

root-mean-square fitting error of driver impedance Z(f) rmse Hx 1.725
root-mean-square fitting error of transfer function Hx (f)

Sd 530.93 cm² diaphragm area

Xmax 10.3 mm

 

Mounting depth? With seat risers
max is only going to be about 7 inches..?

 

Speaker depth from the top to the bottom of magnet it 6 1/2 inches. Not sure if there is a way to angle the speaker to give more room.

 

https://desertdoesit.com/collections/toyota-tundra/products/rear-seat-jackers-toyota-tundra

 

How do those work with the seats bolted to the back wall?

 

Good question? I just used 2 thick washers for a little xtra room..

 

Interesting question indeed lol. You get any snow up there yet? I miss living up there....I was in Great Falls from 92-96.

 

Just got 3 inches last night…