What have you done to your 2.5 gen Tundra today?

Is that molle panel one piece? Looks like it. I’ve been looking at the Rago Fab one, but it’s 3 separate pieces and I feel like one solid piece would be better.

 

I enjoy it too but I don’t have a lot of free time between family and work. I’ll still do a lot of the work myself but somethings I just won’t do anymore so to time.

 

Same. Biggest upgrade of my life was affording to have others perform time consuming tasks, upgrade my available free time.

 

Thank you to everyone sharing their personal experience here.

This forum convinced me to change fluids in the front and rear diffs and xfer box at my 20k mile oil change (today), against the dealer's recommendation of 40k. When the service rep called to let me know my truck was ready, he confirmed the fluid they drained out looked like shit. I believe it's very likely I just extended the life of my gearboxes by tens of thousands of miles.










Havagoodn

 

Damn good feeling! Congrats

 

New scoop sticker. 5 HP added LOL

 

+3 hp for the beading water...

 

No, it’s 3 pieces also. I was about to get the Rago one, but found the Victory 4x4 and took a chance. Once it’s all bolted down it’s very solid. No issues with it.

 

Added some led lighting

 

Picked up a load of OE shit

 

Agreed! I’ve been working on all of my own stuff for over 20 years and my time to spend with my family is worth the cost (for most jobs). If I wasn’t married or have a kid I’d continue to do everything myself.

 

Good to know. I'll check it out, thanks.

 

Another vendor that may be interesting:
BuiltRight Industries | Innovative Gear Mounting Systems

 

I only see products for Tacoma. Did they hide their Tundra gear?

 

Sorry if this wound up being noise.

Their 'universal molle panels' section would be where to look. I needed a particular size plate, not specific to the truck, for an interior application. I'm happy with the steel plate I got from them, but depending on what you're going to mount there and the weight it'll add, their products may or may not be attractive. Looking through their site and at our bed's bulkhead measurements (66.4"x22.2"), there doesn't look to be a perfect fitting single piece.

 

No worries, I was looking while walking into work and saw their Toyota specific items but then only Taco. I was assuming more that I was incompetent than implying you shared something that wasn't useful.

Appreciate the clarification. Their products look good

 

Took delivery of it today. Goooooodddd damn these trucks are large and in charge.

 

New battery installed under warranty. Exactly 2 years from purchase. At least they didn't give me a hard time and I was in and out in 30 minutes.

 

Installed the newer trd pro grille insert on my 2016. You all weren’t lying about those annoying clips lol broke only 1 and looks great. Took about 20 minutes total. Next up is to order a new head unit and install my anytime camera.

 

Congratulations!

 

Let the games begin...

 

And so it begins

 

You doing the Anytimebackupcamera.com kit? What head unit are you getting?

 

I’m doing my damndest not to mod it too much. That’s what my tacoma is for. We’ll see how long I last though.

 

yup got the kit already. I have been debating this for a while and I am leaning towards the Kenwood dmx1057xr as I like using the volume knob over the steering wheel controls but at the same time I don't know if I really need that big of screen nor wireless CarPlay as I have always used bluetooth and that just works for me. The other unit I was looking at was a DMX706s (or similar) since I don't need anything really special and rather same some cash since I just bought the coach builder TRD Pro kit and will need to buy larger tires when I get around to that.

 

So to eliminate the headache that I had, when you install your kit, you will cut the orange wire from his harness and connect it directly to the reverse trigger wire coming from your new head units harness. I just did this last week on mine. Before I did it I had to manually go into my source menu and select camera view to be able to toggle between front and rear.

 

Thank you for the heads up! Saving your comment to have it handy for when I jump into it. Having to figure that out on the fly would be very frustrating lol

 

No problem. I had to call Brian at Anytime to ask. I originally installed it with the OEM radio.

 

Put some spidertrax on today