What have you done to your 2.5 gen Tundra today?

Hirev!! AWESOME!!

 

Do you have a build list on what you used for this? Especially the black box, where can I find one?

 

Sure. I'm in California though so shipping would negate any discount.

 

This what I used:
LeMotech ABS Plastic Electrical Project Case Power Junction Box , Project Box Black 7.87 x 4.72 x 2.95 inch (200 x 120 x 75 mm)

$9 LeMotech Project Box ABS Plastic IP65 Waterproof Dustproof Electrical Junction Box Outdoor Enclosure for Electronics Black 7.87 x 4.72 x 2.95" (200 x 120 x 75 mm)

https://www.amazon.com/dp/B07D23BF7Y?_encoding=UTF8

TT&C 52pcs Cable Gland Waterproof IP68 Adjustable 3-16mm PG19 PG16 PG13.5 PG11 PG9 PG7 Nylon Plastic Black Cable Glands Kit with Gasket

TT&C 52pcs Cable Gland Waterproof IP68 Adjustable 3-16mm PG19 PG16 PG13.5 PG11 PG9 PG7 Nylon Plastic Black Cable Glands Kit with Gasket

https://www.amazon.com/dp/B08ZJ2C25X?_encoding=UTF8

and I just buy a machine screws and nuts to bolt it to the bed rail (Home Depot). The reason why I went this route just in case I need to get easy access to the panel if it fails. Plus less drilling/holes in the bed.

Then I got the Blue Sea 4633 kit off @SDOFFROADMT on IG. I got his ARB Twin + SwitchPro tray mount as well. Great kit and a great guy as well.

I hope this helps.

 

Very Nice!
Has anyone found one that has an actual plug like an inverter has that works well in the bed?
I have an inverter under my front seat that is ran to the battery for laptops and such but there has to be a good system for the bed right?

 

You should start a build thread but with all the shit you’ve replaced tearing it up.

 

Had some fun in Stoddard Wells.

 

I will definitely post one on YouTube and this forum.

 

Opted not to use the free oil change from the dealer and had my local shop do the first oil change and put on the metal filter housing and a fumoto valve that I bought.

 

Is there a schedule for fluids changes other than oil? I have 15k miles and have changed the oil at 1k, 5k, 10k and 15k but haven't changed any other fluids.

 

Yea, there is one in the manual I think. Some of it depends on how you drive or tow though

 

Installed a tailgate seal, had no idea these tundras had such large gaps on the left, right and bottom side of the tailgate, but now it’s all sealed up with a DiamondBack HD cover on top

Also installed a TRD Intake airflow accelerator, cuz why not.

Now waiting on my Labor Day RCI skid plate to ship!!!!

 

Installed the Taco Dude billet push button

 

Pop & lock! Easy install! I bought the plug and play model.

 

Did this today

 

Was a long fun weekend changing the whole front end. No more chrome! Next up lift and AMP steps!

 

About $3200 installed. LED light strip inside. Cargo net inside. Carpeted. Pet screens on sliding windows. Sliding and folding window along the cab. Thule tracks and bars. Color matched.

 

Just curious, but why?

 

Cleaned the beast. The black is looking dark and deep!

 

Welp, i posted on a different thread asking about the Amazon Alpharex headlights and DFRG foglights... didnt know wifey ordered it for me as a surprise so I installed it and im not disappointed lol.
Really love the sequential switchbacks and the DRL mode of the fog lights.



The last picture doesn't do justice, the sequential turn signal is very visible.

 

I really liked the growl driving around town but it really sucked on the highway, especially when towing my travel trailer.

 

1000% agree!! she also wants a more aggressive exhaust for the truck. She kinda misses the straight pipe 6.0 f250 we had haha. So dirtydeeds budget system will be added soon!

 

Looks sweet. What grill is that?

 

I got new wheels. Pro Comp 18s with 0mm offset. Getting a little rubbing at full lock in reverse. Already have the CB bumper shim
So maybe some heat-gun action. I also installed a Oil catch can just because.

 

Ordered a set of 295/70/18 Falken wild peaks. No major source could get them for at least 30-90 days. Found them brand new on eBay. Once they show up I can install my suspension lift, UCAs and icon rebound wheels. Oh and tonight I’m picking up a TRD sway rear sway bar from a local guy.

 

A clean Tundra is a happy Tundra.
Just a quick wash while there was overcast.
What you don’t see is the extra clean windshield…followed a YouTube video (ChrisFix) where it showed me how to clay bar the outside and use a magic eraser on the inside. Windshield has never been cleaner!

 

Love it. I need that for sure

 

Looks good.

Heat gun would be my last option and only after loosening the bolts on the bottom front fender liner and pushing it forward then re-tightenting.

 

Do you have a good write up or video-tutorial for the install?...I'm hesitant in buying these! They look really good! No Cap!