What have you done to your 2.5 gen Tundra today?

I agree on both counts. You could just use a hole saw and create the center hole to mount the USB port easy enough. The ICS QC 3.0 USB port I swapped out is much faster than the one they included with the new Rago plate.

 

Yeah, I have the 67 Designs carbon fiber arms as well.
They are great!

I thought the ICS mounts were supposed to be top of the line.
Hopefully, they’ll cover under warranty.

 

I’m curious if that’s a low profile plug.

 

Guess I should’ve asked you... is it a low profile usb port?

 

Here ya go…
Milliard 6-Inch Memory Foam Tri Folding Mattress with Ultra Soft Removable Cover and Non-Slip Bottom (75 inches x 31 inches)

$150 Milliard Trifold Mattress, Cot Size, 6", Portable Foldable Mattress with Memory Foam & Washable Cover, Tri-Folding Floor Bed, Camping, Fold Up Guest Bed, RV Travel, Sleepovers, 75" x 31"

https://www.amazon.com/dp/B07KWFNHMH?_encoding=UTF8

 

they finally arrived. volk te37xt. now to ceramic coat and then install.

 

This is awesome. If I was single, I'd love a double cab with this set up. You got a great spot for the dog.

 

Yes, that’s true. I do plan on having a water jug and one of my coolers (maybe just my backpack cooler) there. I can always put my 50-quart cooler in the back seat. Still working that stuff out. Plus, I haven’t figured out how to store my 7-foot bass rods in there while camping. If I install the roof rack, I might be able to improvise these overhead straps to attach to the roof rack bolts/nuts in my shell (just an idea I’d been thinking about).

Hapo Vehicle Fishing Rod Holder 86.6 Inches Length Adjustable Polyester Strap（2 Strap）

$10 Hapo Vehicle Fishing Rod Holder 86.6"es Length Adjustable Polyester Strap（2 Strap）

https://www.amazon.com/dp/B07Z857WW2

It’s a work in progress to be sure.

On another note, I’m not single, but go kayak fishing by myself, so this set-up is definitely just for me (and maybe my dog)! Thanks!

 

In like a breeze, noticed the improvement immediately — even backing down the driveway it was noticeable!

 

I'm no expert on USB designation/configuration for sure, but it is definitely a USB 3.0 Type A female connector. I do know that it charges fast with my standard iPhone lightning cables and also the latest edition GoPro 9 cable, which doesn't answer your question. Here is the pic of the plug from their website, you could probably reach out to them for a definitive answer.

 

Been a fan most of my life. I’m looking forward to seeing them for their 40th birthday shows in SF …hopefully they don’t get canceled. So far all indications are that it’s still going to happen!

 

My guess is he’s wondering how tall it is both above and below the “flange”

 

Did my first full fill up after installing the pedal commander. Tried my hardest to keep it in eco mode for the whole tank, I only took it out of eco to merge onto the freeway a few times. Kept my driving style the same, driving over the speed limit, accelerating hard off the line. Normally I get 12.3 to 13.5 mpg on a tank and I just got 14.5. I probably will not keep it in eco all the time because it's just so slow trying to get it moving but it is nice to have when backing a trailer or driving slow over loose terrain.

 

Oh ok, in that case it's the exact same dimension as the Rago one that came with the plate. The outlet itself is almost flush with the flange/face of the dash mount and the rubber cap sticks up about 1/4". On the underside it does not get anywhere near the mounting plate or the dash itself with at least 1" of clearance beneath it.

 

I installed this locking fuel door because 38 gallons might be way too tempting..

 

What ceramic coat?… and what does it do?

 

Protects finish, makes them easier to clean. You can coat your entire vehicle in it and it's a great investment to keep it looking new.

 

That adapter for the power really makes the install easy and super clean.

 

Imagine 10+ years from now when it looks like we drive zombie apocalypse cars because people steal everything

 

Oh duh… Never thought to use it on my wheels.... Thanks.. What’s the offset on those wheels?..their pretty sharp..

 

Maybe I'm weird, but the majority of the time I keep my PC in Eco -4 just because i like way the truck feels...smooth!

 

Yep it’s awesome! I can’t even see it from the driver’s side.

 

Where did you find the fuel door, if you don't mind me asking? I've been searching around for a black one and everywhere has been out of stock.

 

It definitely feels limo smooth on that setting, I'm just always in such a damn hurry it doesn't work for me.

 

Another senior moment, so another stupid question. I promise this isn't the last one.

I want to adjust the default temp the truck uses when being remotely started with the A/C off. Factory default is 77F if the outside temp is between 41F and I think 81F. There exists an interface to the truck's controls that for the life of me I can't remember the name to; but I don't know if it's applicable to that control item, and ending clauses in prepositions is just bad form. I'd like to lower that temp to 70, which would make it more comfortable, hot or cold... I'd really like that setting to override the temp if the A/C is on, and turn the fan on hi, but I might just be asking too much.

Thanks to anyone with insight into what the hell I'm even talking about.

 

Techstream.
And I'm not 100% sure that setting is in there (I haven't specifically looked for it). have you checked the detailed settings in your head unit (there are a lot of the AC settings in there).

 

THANK YOU. I'll be able to do the remainder of the research from that. I'll look at settings already available in the HU first. Report forthcoming.

 

Techstream can be a bit finicky to get set up (all of the versions out there on ebay and such are pirated - the only "official" version is what your dealer has with an expensive subscription and tool attached to it). There is an app-based OBD port tool that some people have reported about on here (I forget the name) that may be less finicky to get working and will provide MOST of the same functions (except for programming new keys and fobs, and doing some of the advanced diagnostic procedures like the transmission flush that has a bunch of computer-controlled steps that the truck runs through). I'm sure someone will be along with the name of that app.

ETA:
Carista - that's the app I was thinking of.
https://caristaapp.com/vehicles/toyota/tundra/2nd-gen

 

Adjustment via HU is a no, at least for a 2020.