2020 Sequioa and 2020 Tundra same front bumper?

So I’m trying to get a after market bumper for my 2020 TRD Pro Sequoia
Identical to this one. And I want to replace the front bumper because of the Houston drivers and they love trading paint with me for some reason especially when I park it. So I’ve been looking on Instagram to find a bumper but no one makes one for the sequoia but I did notice from this forum there’s a lot of Sequndras and I was hoping this company.

https://www.instagram.com/p/CSNeJC7JA_C/


That makes it for the tundra would fit. But they’re not sure themselves. Does anyone here know if this would work?

 

You might be better off looking for a bumper for the 2nd gen (2007-2013) Tundras as they share a few parts/designs with the current Sequoias.

 

I’m not sure if I’m using this thread system correctly so I apologize in advance. But I saw some forums saying that are really close but I don’t know to what extent. I know that the tundra is different in the back because tundras are longer by about 2 feet but I’m just curious about the mounting points for the bumper

 

Yeah, you are asking in the forum section that is for the new 2022+ tundras. You'd want the 2nd gen section. I'll put a link at the end of this post.

I don't have a either a Sequoia or a 2007-2013 Tundra, I just know that the Sequioa is heavily based on them. With some swapping I know some members have swapped the grilles, headlights, and the panels under the headlights, but I don't know for the bumper.

You might try asking in here (2nd gen) to see if anyone knows better than I do.

https://www.tundras.com/forums/2nd-gen-tundras-2007-2013.26/

 

You can either retype it all over there, or ask the mods to move it.

I'll hit the report on this one to get it moved, and you should get better traction.

 

Thanks, Brian.

 

I think the Sequoia peeps use a '07-13 Tundra bumper. The front end is nearly identical except the bumper cover is different and the Sequoia grille is shorter and you will have a gap at the bottom. Depending on what bumper you buy it may not even be noticeable or you can change to the taller Tundra grille.

Some of the '07-13 guys have used '14-21 tundra bumpers. The main mounting points are the same, but do to the different front end it required modifying and keeping the upper bumper fascia on the '07-13 trucks with the newer bumper. Though I can't recall seeing one used that had the brush guard. I think the hoops would be in the wrong places.

 

You would need to find a 2nd gen tundra bumper to fit the 2nd gen Sequoia. You can look into doing the 3rd gen Tundra front end swap if you like the 3rd gen options but that involves more work and body panel replacements.