Crackhead resurrection

Huh. Never knew someone made camel socks. Go figure!

 

On a serious note... I'll be attaching links to various parts I find on company pewter. Links are to OEM source that @w666 posted. This is so I can click on phone, and order from there. Not putting any personal finance info on company pewter...

Fan Shroud $88.59
Lower fan shroud insert $59.91

 

Did you get a desk job? Haha jk, but seriously, we just had a stupid meeting and the garbage putters were brought up, and the brass was like “yeah we’ve known those have been issues, you guys are pretty much at the end of the list to get them replaced” hahaha

 

So Summit just sent me an email. Earliest they can get me parts is late November

So, how about rockauto? Anybody got any good links for me?

 

Which parts were through summit? Seems like rock auto is pretty reliable. You can always save 5 percent by just googling for a discount code.

 

The timing belt, and water pump kit... something that is on the tip of the spear for my needs at the moment.

 

I need to bleach my eyes

 

Just the tip! I’m excited!

 

https://www.rockauto.com/en/moreinfo.php?pk=1798458&cc=1357938&pt=16088&jsn=1380

5% discount code 181580310165224702 <---- enter this code in the "How Did You Hear About Us" tab.

 

@empty_lord, How important is the Hydraulic tensioner to replace? This kit provided by @Lil Steve ... Does not come with one.

Ever seen a tensioner go out? Can I get one thats not part of a kit? Damn this third shift, hectic ass

 

$26, throw it in the cart. https://www.rockauto.com/en/moreinfo.php?pk=7588068&cc=1389001&pt=5721&jsn=1199

 

I didn't do mine, wish I had. Although I haven't had any issues with it. Yet. $26 is cheap insurance.

 

I can't thank either of you guys enough. Y'all must have them fancy desktops. Tablets, and Cell phones ain't where it's at for part viewing.

The work computer is like some sort of damned tablet/laptop hybrid thingy. Not worth a damn for anything, but company paperwork.

 

Dunno about Toyota, but certainly have seen them go out.

 

Don't forget to use the discount code!

 

Thoughts on these silicone hoses?

Ebay link here.

 

@Lil Steve prder placed with discount which saved me $16 + change. Shipping was $57 + change. Total investment $386.88

I need a spreadsheet . I'll be canceling my summit order.

All items are expected to be here by September 9th at the latest.

 

Just saying - while it's brandy new...

$160 Cosmoline RP-342 "Heavy" Rust Preventative Spray (Military-Grade) 12-Cans

Amazon.com: Cosmoline RP-342"Heavy" Rust Preventative Spray (Military-Grade) 12-Cans : Industrial & Scientific
Think they'd let you spray the innards before they attach it to the truck?

 

@Tundra2 when you did the DEPO clear corners, you re-cycled the OEM base to stuff in a 3157 switchback? Or did your DEPO's come with a 3157 base? Mine have a crappy round bs base but I have my OEM corners so I figure just use those.

 

I was going to ask that very question when they call me, and tell me the frame is ready. May spray it inside anyways, and ask for forgiveness later.

You need these bulb sockets. Any toyota vendor of your choice. Here's a link to mcgeorge.
https://parts.mcgeorgetoyota.com/oem-parts/toyota-turn-signal-light-socket-front-9007599106

These convert from 3157s to 1157s which is what size bulb switch backs I used on my V6. If you just pop in a 3157 led you will lose the parking light feature as it's how the 3157 bulb adapter is wired.

The following link is for the bulbs I used on my V6. They have gone up significantly since my purchase.
https://www.vleds.com/shop-bulb-numbers/1157-led/1157-70-hv-wa-c.html

You will also need an LED compatible turn signal module or load resistors. I went with the high dolla smart tap on the V6 and the budget turn signal relay on the corolla. Both work goooood from diode dynamics

 

Ah, you purchased adapters, thanks.

I'm re-wiring the whole enchilada so while I may need load resistors, I don't need anything other than something to get me bulb pins via connector.

The plan is

full strength white DRL (maybe ignition switched or maybe with dedicated switch or maybe attempt to upgrade the stalk to one with DRL, no idea yet)
parking light in amber at half strength
full strength turns with flashy flashy

So I'll need dimmers and some way to have turn trump parking light.

I think you use the whites as parking lights? I definitely don't want that and I definitely don't like my halogens on as DRL's which is how my truck works right now. That will be a waste of precious resources once I get high performance halogens in there.

 

Sounds like you've got it all figured out. Rewiring shit is just out of my expertise. Hell, I needed help with a simple relay box for switches... but hey. I'm one hell of a parts changer

 

Yeah, man, spent the last 30 minutes coming up to speek on ck vs not ck, that's some detail I wish I didn't have to learn.

Hey, so, on radiators, I need one too, and Dan's source wants $1600 so I'm not too interested in that option. I was going to try calling some of these yahoos tomorrow. I'm guessing you'd rather not drop big $ on that part? I don't really want to throw more plastic in mine...

https://www.mishimoto.com/toyota-tu...GYAi9Q5LX5951hgizq4AReNDQZ75wcv0aAludEALw_wcB

https://www.coldcaseradiators.com/product/00-06-tundra-47l-aluminum-performance-radiator

 

I'll be honest. I don't know jack shit on radiators. Going budget for now until I get everything buttoned up, and working as proper.

I may go with one of the two links you provided in the future as those both appear to be quality. I'm sorry that I can't help further. Perhaps @SouthPaw would be able to chime in or @empty_lord

 

Holy shit $1600??

 

Go with Denso or OEM. They work for 90%of people. I just went fancy to avoid potential issues when towing.

 

Denso works fine for me. One day this truck will be a tow rig, but that's a good ways into the future. Denso was on the Rockauto order.