If you have replaced your TRD Pro bumper with aftermarket…

I’d like to know if the plug to the stock Rigid Fog lights is H11 or not?

 

I’m going to say yes based on being able to order these with this description from Spark’s Parts:

The 2019/2020 Tundra TRD Pro comes standard with a set of LED Rigid fog lights. These are fog lights built by Rigid specifically for Toyota. This means that they are not only built to OE spec, but they are designed to attached to your bumper the same way the original fog lights will and plug into your OE fog light connector.

PKTUNPROFOG

• PT228-34190-AA - RH Fog Light

Fitment

• 2014 Tundra - All Models
• 2015 Tundra - All Models
• 2016 Tundra - All Models
• 2017 Tundra - All Models
• 2018 Tundra - All Models

My 2017 1794 w/factory fogs (non-rigid) used an h11 as the OEM connector

You can order a set of H11 to Deutsch connector from Caliraised for pretty cheap if your new fogs use that type of connector…
https://caliraisedled.com/products/...t-pod-oem-adaptor?_pos=1&_sid=8a9a801a7&_ss=r

 

That is information is very helpful…thank you for responding!

 

Can anyone confirm if the TUNDRA TRD PRO RIGHT FOG LIGHT LAMP BEZEL GENUINE TOYOTA PT228-34190-AA and TUNDRA TRD PRO RIGHT FOG LIGHT LAMP BEZEL GENUINE TOYOTA PT228-34190-AB will fit on a 2021 Sport Tundra. I have the Rigid D2 lights removed from another vehicle and would like to install on a Sport Premium.

 

I feel quite certain they will! I just pulled my Rigid’s from my TRD Pro a few hours ago and went with Diode Dynamic Pros and changed the bezel out to make it work. So, my truck had the square bezel with Rigid’s and now has the round bezel with DD’s.

 

Great thanks. Just ordered the square bezel PT228-34190-AA / AB parts. The Rigid D2's SAE were a significant improvement for night time driving over any fogs I've had in the past.