Atoto S8 Ultra Plus 10.1" Install Help

Hey guys, Tundra newbie here, but a long term 100 Series Land Cruiser guy. I have a 2015 CrewMax with an amplified, Non-JBL system.

I plan to install the 10" Atoto model

$300 ATOTO S8 8-core 9" QLED Double Din Android Car Stereo, Wireless CarPlay & Android Auto, Built-in 4G,WiFi/BT/USB Tethering, 2 Bluetooth, 4G+32G Android Radio, SCVC, AI Chat, MirrorLink,S8G2094MS

S8G2119UP and I'd like to retain my steering wheel controls, speakers, factory USB port, and factory GPS antenna, but I'm unsure what I need in terms of a wiring harness to correctly wire up the Atoto... I have a radio antenna adapter for the truck and the adapter to use the factory USB port. I've also purchased the OBD2 scan tool and USB dash cam from Atoto.

I currently have a

iDatalink Maestro ADS-MRR + HRN-RR-TO2 T Harness for Select Toyota 2012 & UP

Maestro RR and an rTO2 harness, but I'm unsure now if those will even work (I'm pretty sure they won't.) . Can you guys tell me what harnesses and adapters I may need to properly hook this up?

I made it to roughly page 30 of the 56 page Dasaita thread, but I'm not even sure if that's an apples to apples install comparison. All I know is, I've over-thought this thing to death and its exhausting LOL. Thanks in advance for any input or advice! I appreciate it.

 

I dont think that the maestro will work with that. there's a special port on the back of the head unit that the maestro plugs into to integrate all the factory stuff.

Here's all the adapters i needed for my 2017 non-jbl. I would ditch the head unit and get a kenwood.

 

Thanks man, that's helpful. How do you like the Kenwood? I'm thinking I may go that route.

 

Send ATOTO an email asking if they have a CANBUS harness for the Tundra.
If they don’t it won’t work as you hoped.

 

Sorry, i missed this reply.

Its great, sounds great, looks great....cant ask for more.

 

Installing an atoto a8 in a 2016 Toyota tundra nothing matches wiring diagram