Lift wheel size and offset tire size

Hello tundra owners. I’m looking for photos or recommendations on lifts for my recently ordered 2021 tundra crew max 4x4. I’m looking to run a 295/70-18 tire, basically a 34x11.50 and 18x 9 wheel. Any photos or recommendations would be appreciated.

 

Also wheel offsets. It’s something many people don’t factor in.

 

285/75-18 method 316 wheels

 

https://www.tundras.com/threads/official-tundra-wheel-and-tire-setups-pics-and-info.95/

This thread has an enormous amount of information

 

My DC is on a Toytec 3/2 with 18x9's on a +1 offset. Tires are 285/70/18 Ridge Grapplers. The 285 and 295 are within 3/8 inch of each other.

 

Procomp 3/2 level
Method 18x9 + 25 offset
Falken wildpeak AT3W 295/75r18

 

Eibach 2.0 full kit. Spc uca’s. 1cb shim passenger, 2 cb shim driver. 3 inch coachbuilder shackle. 295/70 18 +20 offset

 

What wheels and offset are these ? Are they relatively flush to the fenders ?

 

Method wheels with a + 18 offset. They stick out a bit but not much at all. I was worried about water flinging up in the PNW but it is not much of an issue. The greater consensus is that +25 is the best offset for a 3/1 kit.

 

I also have the Method +18s and I'm looking for something with more positive offset. With the Wildpeaks it picks up and throws the limestones all up my rockers and it started to piss me off with a bunch of chips on a truck with 6k on it. Conflicted on where I wanna go from here so I'm looking around.

 

This right here.

 

6" Pro Comp lift 20 x 10 Fuel Vectors 35 x 12.50 ridge Grapplers. Sorry I don't know the offset. I have no wheel rub and no body mount mods. I did have to use the Bushwacker flairs To stop the rock dings.

 

3/1 Rough Country lift
295/70/18 Dick Cepek tires

 

These might be worth looking into.

https://rokblokz.com/collections/to...ucts/toyota-tundra-mud-flaps-mud-guards-08-14

 

Sliders will protect your rockers and take most the rock hits. Expensive, but so are wheels.

 

You don't want to know what it takes to go up 6" for 35 x 20's

 

Ok.

 

Boss 4x4 3/1.5 bilsteins 6112/5160, 2/1 shims, icon leaf pack, cooper 295/70/18 raceline +18

 

Thanks for the photos and info guys. It seems to be hard to find a rugged looking wheel with a -12 or -24 offset. I like a little wider stance. Most everything I’m finding looks like some bs princess mall crawler looking wheel or they have some ridiculous offset. It’s looking like method will be the choice. I had a set of xd 18x9 -24 on my 2011 ram 2500 and they set just right. Can’t seem to find anything in xd. I also had a set of 17x8 methods on a jeep and they were a really tough wheel. One wheel took a hit from a enterprise rental mini van and it bent the axel but didn’t damage the wheel. The hit was so hard it spun the jeep 180* on dry ground. Good stuff. the search continues.

 

Don't forget that the stock wheels have a +60mm offset. Specifying a minus offset, if that is what you want, will leave you with a wheel that sticks out quite a bit.

 

customwheeloffset.com yielded 116 results of 18 inch wheels with the minus offset you’re looking for….

great search filter on their site

 

I ran across that site. They do have a big selection. It’s a matter of finding the style I want at this point.