Serpentine belt replacement

I need to
change my serpentine belt...not much room to do so, do I need to take the fan/fan shroud off and how do I do that? Thanks

 

Use a ratchet and socket to crank back tensioner pulley and Pin back the tensioner pulley with a short screwdriver or whatever and take the belt off….there should be a sticker under the hood that shows the routing…remove pin from tensioner and done.

 

How long does this job take 15 minutes?

 

Here are a couple videos. Have a watch and decide if it's something you want to tackle...

https://www.youtube.com/results?search_query=tundra+serpentine+belt+replacement

 

The first time it probably took me 45 minutes. Mostly staring at it. The second time, which was shortly after because I didn’t route it correctly, took about 5-10 minutes.

 

Super easy took 20min i replaced my tensioner as well was getting a squeak on cold start guess the spring was giving out

 

PSA - save your old belt if it's useable and keep it in the truck. Just in case you're on the road and something happens...