What have you done to your 2.5 gen Tundra today?

Installed Go Rhino RB20. They stick out further than I like, just have to get to use them I guess. Also the passenger side had some damage where the foam wrapping was at so it was packed damaged. Will give them a call tomorrow.

 

I hate to ask... what's your mpg these days? Also keep us updated on how you like the regear.

 

Yeah that why I sent mine back and went with the Tyger steps. I had 2 bad ones and was not going thru for a third. And did not like how close they sat against the lower rocker panel. Also the finish on my Tyger steps so much better with the bed liner finish.

 

Not something I’d consider significant…

I only did a light smoke… so definitely not as dark as many of the other options out there.

 

Around 12 before gears.
I tow a lot.
My guess is gears will help.

I have a D.A.P. tune as well.

I do drive it like a sports car from time to time.
That way gets about 10mpg.

 

The windshield tint will reduce light visibility some. I have 50% on mine and I'll try to get some pics in the morning from inside when it's dark.

 

Replaced the carbon fiber look handle covers with the AJT’s. These wrap around the handle and hide 99% of the silver unlike the ones I got off eBay that showed quite a bit. These fit very well though!

 

I’m thinking I really like that bumper! Do you have more pictures from different angles? I could find many online. Also, does it have the Tyger logo and the Tyger stars anywhere on the bumper? I like most of the Tyger stuff, but really dislike how prominent their branding is.

 

Preparing to do my first oil change (first 3 were done at the dealership).

Is anyone familiar with a video showing the oil change with a TRD skid plate but not removing it? I'm considering buying a TRD skid plate but am skeptical about that little trap door in the TRD skid plate being big enough to get the filter out easily and without massive amounts of oil spilling all over.

I have a stock skid plate that's been lowered with the spacers for a diff drop. I'd like to install a skid plate once and then not have to deal with it each time I change the oil. Maybe it's not possible but that's why I'm investigating.

 

Bunches.

The logo is stamped but is barely visible once you step back.

 

Made a harness to connect the oem mic to aftermarket HU 3.5mm receptacle. Works well.

 

Is the usb portion for power or audio as well?

 

For power.

 

Thanks. That’s what I thought. I know that if you put what you did ( diagram used/tested ) people would love that. Probably even pay you to make it for them. Sooooo many people have am headunits.
Good job regardless!

 

I can post the pinouts tomorrow. I stumbled across the info on another forum so I can't take credit for figuring it out.

 

I’m a big fan. I prefer this to their front bumper. Thank you for posting!

 

Gave her a wash

 

Maybe but they look really good!

 

Finally installed my Coachbuilder +3 shackles and

$270 Timbren TORTUN4 Suspension Enhancement System

Timbren TORTUN4 rear bump stops. I was visiting family in Eastern WA so I had some help. Got it done in under 2 hours and I love it! I cant wait to get some bigger tires in the future. I can definitely feel a difference with the new shackles. Bought a ball joint press on Amazon which made removing the rear leaf bushing much easier.

Just in case people were wondering about my tires and suspension setup:
-2020 TRD Pro OEM Suspension
-ReadyLift SST Pro Plus 2 Lift Kit
-Coachbuilder +3 Shackles
-Front and Rear TRD Sway Bars
-18" TRD Pro BBS Wheels with BF Goodrich KO2 275-70-18.
-Spidertrax 1.25" Wheel Spacers Front & Rear

 

BackSeat panels and accessories from BlueRidge Overland.

 

Done last week, cali raised trail sliders with kickout and rhino lining. Looks amazing. Stick out perfect amount to function as a step but not destroy shins.

 

Swapped out my old mollie rear seat for this more solid beefier rear mollie rig

 

Rough Country 3” step up bars

 

They are Method 701 matte black. 18x9 with a 25mm offset. I really like how it all turned out. Just need to get my camber in the 4+ range so they don't rub the body mount. Don't want to do BMC if at all possible.

 

I agree 100% because my plate can be read a different way also but its mine and I'm ok with it. Pretty much why I did it.

 

I for one enjoy a hard turd; something substantial always feels like a win on the throne.

 

Oh... it's "hard TRD".. makes sense

 

Lol

 

Caster, not camber