What have you done to your 2.5 gen Tundra today?

Ya, sure... the "wife's" purchases.... No boxes full of suspension or wheels or tie-downs.... Aha. lol

 

Looks good, put one of those 60” tailgate light bars between. I have the tailgate light bar and it was a simple install.

 

I have Pro-Loft 6 ton jacks just because, might be overkill, but I want to be safe then sorry.

 

I'm with you on that.

 

I just did my initial wax on my truck with the Meguirs Ultimate liquid wax. How do you like the Beadmaker?

 

Finished up the right fender liner & right front parking sensor after the front grille/bumper chrome delete last weekend.

Good news… Front parking sensor replacement didn’t cause any errors after being disconnected for several days. I bought OEM and damn that little part is pricey!

PSA, if you get new bumpers you may have to get new “liner extension seals” for the fender liner. In the pic you can see the old vs new where the the screws go in and the black rubbing when I initially tried to manhandle the old clip on

 

Those are basically the jack stands I have and will be using this weekend to install my lift. I've used them once before. They seemed stable enough, didn't seem to have any issues.

I'm concerned about death as well. But (I hate using that word when talking safety), if only the front of the truck is on the two stands, I'm not sure how much weight that is and I doubt I'll be crawling under the truck...just taking the tires off and installing the lift. Anyone feel this is a bad idea? Maybe I spring and just go have the shop put them on.

 

Yeah I saw that. Karma at it's finest.

 

Nice ! ..sent pm

Good job ! ..both handles look good, I went with AJT to avoid taking door apart

NICE ! Your 16 looks like it just rolled off the line ... beautiful !

 

I like yours better than what I ended up doing.


Bonus points for the bottle opener!!

 

Maybe we need to start a tailgate bottle opener club...

 

If I need extra height, is it a bad idea to set the jack stands on a couple of 2 x 4's?

 

Exactly what I do anytime a wheel comes off I lay it under the frame just in case. I had a scissor jack fail on me when changing a flat several years ago slamming the rotor in the pavement. I learned my lesson that day.

 

Yes IMO. Buy bigger jack stands. The 4 Ton at Harbor freight with the locking pin are quite a bit taller than the lesser weight capacity ones. They are also wider to better support the weight.

 

Can you share a link? I'm only seeing 3 ton jack stands on HarborFreight website.

 

Looks like they cut their Jack Stand selection way down. Likely due to the issues. Here is an option Strongway Double-Locking 6-Ton Jack Stands — 12,000-lb. Total Capacity, Pair | Northern Tool

 

I was looking at this website. You must choose between short or long depth. Can anyone explain what this means? And I'm trying to understand the difference between all these USB charger standards - anyone know a good site that explains this (quick charge, 2.1, 2.4, etc, etc). I'd like to put one of these in but I'm not sure which to get. Thanks.

 

I'm planning on a tonneau cover, nice find on these. I'll definitely be adding them when I find my cover.

 

Got my custom CAT cover installed today.

 

Rolled the Softopper. Nothing significant, but I really like the way it looks with the sides up.

 

Can they still cut the Cat thru that large open hole?
I hope not. Looks good and is unique

 

Nice. Does he do aluminum and steel? Can you PM me his number? I still haven't received a reply from him. Thanks.

 

Installed the Switch Pros switch panel with the SDHQ mount this evening, gonna wire everything up tomorrow.

 

Installed a Undercover Flex after work today … took about 2 beers time.

Pretty straight forward. I did go over all of the factory screws for tightness. UPS had done a number on the box. Will likely recheck periodically after seeing some reviews. I’d imagine these get a good deal of bumpity bump on my Parish roads.

Hope everyone has a great upcoming Memorial Day weekend!

 

Forgot to post this the other day. Reflective black vinyl flagAnd installed a set of brand new durobumps I got off a guy for $100.

 

Cinder blocks will collapse under a load. Please don't use them to support anything.

 

Put this on today, I like it.

 

Link please?

 

Added the Toyota power tailgate lock and Rough Country's tri-fold hard cover last night. Worst part of the whole thing was the floorboard styrofoam on the passenger side. Not sure how those fasteners secure but I relieved it enough to get to the grommet.

 

Here you go

https://4knines.com/collections/bac...s/crew-cab-rear-bench-seat-cover-with-hammock