Magnetic Gray Metallic-MGM (1G3) Picture Thread

Sequoia National Park this past weekend...got a little snow...

 

Snow in May you can keep that.

 

New 295/70R18 Falken Wildpeaks.

 

All cleaned up for the weekend. Love the way MGM pops when clean!

 

Beautiful truck. How did you change your door handles? Did you black out the rear lights?

 

Thank you. I took them off and painted them myself. There is a thread on here somewhere. The rear lights are the spyder taillights.

 

whats your setup? Mines about to look the same just with 33’s on 20’s

badass clean rig for sure

 

Thank You.

setup:
35x12.50/17 Nitto Ridge Grapplers
17” Method 312s
Fox 2.5 with remote resi and dsc adjusters on front and rear
JBA HD upper control arms

 

What did you use to clean it up that thing is shiny!!!!!!

 

i use GG 3in1 ceramic spray once a month and GG ceramic quick soray after every wash

 

Nice. Mines about to be;
20” Method 301’s
33/12.5/20 toyo r/t
Stage 2 eibach 3”
JBA UCA
+3 CB shackle

can’t wait!!

 

New bumper, lights and winch.

 

275 70 r18 bilstein all 4 corners middle setting in the front. Kinda wish I would've did 295 70 r18. Next time

 

I dig Mikey in your profile pic!

 

Not a lot of folks know what that means.

Havin a good time.

 

Really like these! Please share the info on the tires and wheels. I've got a MGM Pro coming in in about a week!

 

21 MGM with 20” Fuel Blitz in Platinum and Ridge Grappler shoes. APS iBoard Running Boards.

 

Post lift pic after getting my front done right

 

Tell us more about the lift.

 

Wife bought me the (wrong) kit from Westcott Designs, since my truck is a Frankenstein’s monster with parts from different years. I had this one installed to give a little more lift up front to match up with Icon expansion leaf packs I installed in the rear: https://westcottdesigns.net/product/bilstein-trd-pro-lift-kit-front-only/

It’s a cool setup that I’ve seen a few other guys on here install, using the larger collar and a shim to balance between spring preload and travel. Alignment numbers looked good and the truck seems to handle well. I’m about 3-3.5” over stock (non-TRD Pro) in the front and 1-1.25” up in the rear.

 

I’m trying to achieve the same amount of lift, what notches do you have them at DS/PS?

 

I’m using TRD Pro Bilsteins so they aren’t adjustable. Westcott makes the lift kit I linked that sorta simulates going up a couple perches, using a taller collar than the factory one and a half inch shim on top. I don’t think you can get quite the same lift with the 5100/6112 without also adding a decent sized spacer on top as well.

 

My MGM four wheel camper rig

 

Yea that’s the collars I was told to get for the 6112s. I thought I seen a post somewhere before when I was researching about which notch to put it on for 3”.

 

Just put this camper shell on. Just need to wire up all of the lighting.

 

Looks great, really compliments the truck..

 

It's fire season in Montana

 

My 2WD, work in progress street Queen.