What have you done to your 2.5 gen Tundra today?

Upgraded my hold downs. I bought the topper 2nd hand and didn't get any clamps. Eventually I'll put my unistrut back in and redo the clamps. Thanks dwarven1 .

 

Bitter, I feel your pain. I bought a size 6 x 5/8" black screw at Ace Hardware and it is a perfect fit FYI.

 

Thanks!

 

I went out to run errands after work, and pickup a screw for the 3rd brake light lens. Holy hell are these GTR interior lights bright. It's not just that they are white they are bright as hell, the cargo lights and license plate lights are as well. Wow, huge difference.

 

When I say bright, I mean bright.




Lights on.

 

Looks like someone is being abducted

 

No kidding.

 

I just ordered this Torx Security socket set, the old kill two birds with one stone. Pretty sure I have seen Torx Security needs referenced here on the site, plus they should work just fine for normal Torx needs like my taillights so I can put my GTR 7443 led reverse lights in.

$20 LEXIVON Tamper Proof Torx Bit Socket Set, Premium S2 Alloy Steel | 13-Piece Security Star T8 - T60 Set | Enhanced Storage Case (LX-146)

https://www.amazon.com/dp/B084SQN99T/ref=cm_sw_r_cp_apa_fabc_2GQRXYC3N1B2EM4XPK95

 

You might be referring to the torx security screws when people are talking about the catalytic converter plates. The only problem there as far as using them on the cat plates is that you can get that torx tip anywhere. Some of us ordered this type.

https://screwdsecurity.com/collecti...screwd®-machine-screws?variant=32004809097325

 

Impromptu hail storm yesterday morning and pure SLOP for the last two weeks. It did handle a rocky as all hell creek bottom with zero issues though. So that’s a plus.

 

Finally replaced my weathertech floor mats from last year. I hate buying things twice.

 

I will be doing this soon as well. These weather techs are garbage...

 

You won’t regret it. When I bought my new truck last week I made them swap out the husky’s from my old truck haha. I won’t own another truck without them. And I owned weather techs for 10 years

 

So far the Toyota all weather mats are working well for me.

 

What happened to the weathertechs?

 

Shifter Trim / Cupholder Trim...

Not sure I can add much more than a nice pic to the tons of info already available here (where I got inspiration and all the info I needed to get the job done), but:

On the shifter trim, I painted the silver bezel as well as the little chrome accent. I disconnected the plastic welds that hold the trim pieces to their parent pieces, painted them individually, and glued them back with Loctite Plastic Bonder. It's a stinky mess to use epoxy, so if you're not already experienced with it, be sure to tape off your parts really well and use it in a ventilated area. The inner piece (with the chrome accent) is not really friendly to remove or replace, so carry some patience in your tool bag.

On the silver piece, I cleaned it really well, including using rubbing alcohol to ensure no greasy fingerprints stayed under the paint. On the chrome shifter accent and cupholder trim, I rubbed them down really well with a ScotchBrite pad (it does about the same job as 600-grit sandpaper w/o getting clogged every 6 seconds...), rinsed, and finished prep with alcohol. The paint I'm using says it bonds well to chrome, but I don't mind the extra effort of getting the surface a little more welcoming to paint. Everything got SEM Trim Black; 3 fairly wet coats 20 minutes apart, and they rested overnight before reassembly. Dig through Tundras.com for plenty of info on disassembly/reassembly, and I'm happy to answer any questions.

 

Looks good! I haven't tried to paint the gear shifter yet because I will probably screw it up in the process. One day .. maybe.

 

You motivated me, if you don't mind, what paint did you use to do this. That looks really good.

 

SEM Trim Black:

$21 SEM 39143 Trim Black Aerosol - 15 oz.

https://www.amazon.com/SEM-39143-Trim-Black-Aerosol/dp/B000EM019O

 

Thanks! Just go for it! What's the worst that can happen?

 

My first thought was tanning bed

 

I did this also but mounted mine differently. I did mine under the bolts for the seat.

 

Can you post a pic of the bracket with the extinguisher removed?

 

Bought a 6 way switch panel and a light bar yesterday..... This time I’m not taking a no from that firewall grommet.

 

I've been researching the same thing and eventually found this little device. Not completely sold on it as it won't have power full time to the control switches, but it does avoid running wires into the truck.

After talking with another user, I'm pulling the link. With countless issues, dead battery after 24 hours, 2 bad units and still waiting on a final/third replacement with radio silence, can't leave it for others to find.

I ended up going with the switch pros as I'm not sold on the wireless remote per say.

 

Yep, I was in the same boat as you and opted for the Switch Pros vs the 6 channel trigger controller.

 

Here you go.

 

I just had my front windows tinted today to match the factory. (Or as close as possible.)

 

Don't do it. Please don't waste your money. Not sure if this is from a vendor on here and I don't want to step on any toes but PM me before you buy this.

I'm referring to the trigger system not the switch pros.

 

Just PM'd ya.

Not a vendor at all. Just sharing some of the products I found. I have 0 experience with the Trigger Controller at all.