What have you done to your 2.5 gen Tundra today?

I think one is for front and/or rear cam and the other is the back slider switch that came from the lower left dash panel. Id like to do center console switches but running that wire

 

Is that a Matrix bumper?

 

Hit my build thread in my signature. The first post is hyperlinked to the individual mod and part numbers or links are listed in the individual mod post

 

Carpet in the back driver side never looked right. Decided to look under it to see what the bulge was-found this old Lowjack. Didn't look like it was powered. Removed it and carpet is good again.

 

Could be worse. I had a iPhone XS when installed the wireless charger. Now I have an iPhone 12 mini. Thing slides all over the place lol does terrible charging in stop and go.

 

how was the install?

 

Got my new ladder and installed it. Put silicone sealer onto all the screws that went into the tailgate. Not terribly stable but good enough.

 

Last weekend - wifey; not so happy with me after spending 24hrs in the Garage.

check out my build here



Best,
hefemi.

 

Scored a truck cap for dirt cheap. Definitely needs some TLC but even in black I think it looks decent.

 

Just finished installing the Headlight Revolution switchback fronts, LEDs for side markers, and some 5k LEDs for the license plate. Rear brakes tomorrow, when I pick up a new floor jack (any recommendations?? haven't needed one in ages, but looks like the seals are gone in mine.), registration, inspection and a thorough cleaning. I'll also wash the Pro and get the first round of Griot's 3-1 ceramic spray. Fingers crossed the weather holds up. Its been pretty windy, though the skies have been clear.

 

Just installed this Heavy Duty Tailgate Cap. Super solid, there is no bending or cracking this one, unlike the flimsy OEM plastic piece!

 

Oh I like this one, a lot.. It's going on the list.

 

Zero Issues with the front radar sensor , Ranch Hand Updated all their offerings for the tundra by not installed the center mesh on the grille guards and full bumper replacements , This allows the radar to have a clear view and not causing any issues . I have seen the same issues with rust on these ranch hands , Once you get rock chips in the powder coat it starts to rust .

 

Diff drop spacers, spill and fill WS ATF, front seat lifts.

https://www.tundras.com/threads/front-seat-lifts.85769/

ordered my Cooper Discover XLT AT3 tires for mounting tomorrow.

 

What size did you get?

 

Do you have link where you for this?

 

https://www.tundras.com/threads/heavy-duty-tailgate-cap.84591/

Instagram @WSDMetal

 

275/65/20

 

Do you have a link for this?

 

https://www.tundras.com/threads/heavy-duty-tailgate-cap.84591/

Instagram @WSDMetal

 

I just ordered a Switch Pros 9100 setup, the panel for the center console, the under hood mounting plate and the switch system. I will want this on-hand, when the Diode Dynamics 42" in bumper lightbar arrives. This weekend, I ordered GTR Leds, from Headlight Revoloution, I ordered the full kit for the interior including festoons, a set for the license plate lights, the 3rd brake light mounted cargo lights and a set of backup bulbs. Let there be light!

 

That'll be a perfect setup with the lift!

 

A few hours under the rear of my truck to install the old man step

 

Did the fogs about a month ago and finally had a couple of days in a row with warmer temps because I was worried about the plastic and did the headlight bulbs at work today.

 

out with the old v3 and in with the new

 

Good work on the tb!
I did the same to mine a couple years ago.

Since you got it off, run the tb bypass when you reinstall, (so long as you’re not to far north/Canada parking outside all the time)

 

Giving a set of @602runner bed tie downs away!...these things are legit, I installed them a couple months back and couldn’t be happier...I know a lot of us on here have already purchased them from him buy here’s a chance to win a set for free, details in video...thanks for an awesome product Keith!

Aftermarket Bed Tie Downs by Charvonia Designs...Giving a set away!
https://youtu.be/szL8obphvDE

 

But that set looks red...

 

Hahaha...That’s the set I’m giving away, you know the ones I put on my truck are blue!

 

I'm looking for new nerf bars. Do you guys know which ones will stick out far enough to protect the truck from door dings?