What have you done to your 2.5 gen Tundra today?

Dang man, that suucks! Hopefully you can get it popped out by a good PDR guy.

 

Yo Jake! The tails won’t come apart in the oven, they are plastic welded shut. The only way is to cut them. Headlights can be cooked, though. Your tails look badass!

 

Nice!

 

Ouch! That really sucks!

 

Good to know. And thanks! Knowing that the headlights will actually come apart I might give those a try when I have a free weekend. Have you by chance cracked open OEM LEDs? I would imagine there’s no real issue there but also don’t want to nerf a $900 set of headlights by being an idiot lol.

 

Love that road.

 

Bastages!

ETA: If you haven't already seen it, here's a post that has some detail on how to deal with buttoning up the places where they get in.

https://www.tundras.com/threads/mouse-rodent-proofing-stage-one.44679/#post-1146648

 

it's perfect.

 

I’m hopeful that you can rid yourself of those farging iceholes ASAP. Best of luck with the vermin It will clean up and then you need to figure out how they’re getting in must find source

 

Farging iceholes. Gotta love a well placed Johnny Dangerously reference.

 

Shout out to post page #1791

 

Got the new carhart seat organizers

 

I’ve ran 4 sets of these tires. They do fine on wet roads.

 

Ooooooh nice!!

 

Yes, I’ve opened the OEM LEDs. There are more screws and internal parts, making things a little more difficult, but they came apart. I was just fixing someone’s sealant. Their light was leaking.

 

I haven't looked into these yet. How does the bottom attach? They look really handy.

 

Just with a bungee clip , very sturdy

 

Let us know the first rain you get. I'd like to pull the trigger on a set too

 

Thanks! That's good to know

 

This^^^^

I also added gorilla taped all around the edges just to be sure nothing could ever squeeze in

 

Yep. Thought I got off easy.. nope. Gotta take the dash apart this weekend to fix whatever shitshow is happening with the fan they created. The entire dash shakes violently when the heater is turned on. Sounds like theres a hunk of fabric stuck and its smacking off something. Assholes.
Doing the tow mirror install this wknd (IF I GET MY EFFIN REPLACEMENTS, SPARKS..) so will be tinkering anyways, meshing every opening and the trucks getting peppermint spray and being parked in the garage at work from now on rather than outside.
At least on a positive note, I replaced my old shitted out stock battery with an agm so I got that going for me.

 

Way to find the bright side. Sorry it happened to you. Never fun to see this happen to folks but you just got the Inferno all together. You deserve to get to drive it around and show off!

 

Suprised you didn't go with a cat skid.

 

I bought this prior to me learning about those thefts.

 

I had a very similar experience to you last summer. If you remove the wiper cowel youll find a ~3"x10" air inlet that opens directly onto the cabin air filter. I sealed mine up with some fine stainless steel mesh and the airflow in the cab seems the same ... No problems since

Edit: adding link

$12 Valchoose 4PACK Stainless Steel Woven Wire Mesh Never Rust, Air Vent Mesh 11.8"X8.2"(300X 210mm), Hard and Heat Resisting Screen, 1mm Hole 20 Mesh Easy to Cut for Rodents Filters Window DIY Projects

https://www.amazon.com/gp/product/B07Y65H3KT

 

Installed my ME-SO start/stop button. Not sure how I found the button before now, this is much better.

 

Gotcha. You could probably have something made locally that you could bolt on to it. It would be easy to do.

 

Do those steps retract?

 

Speed sensor guards installed.