Lunar Rock Club

Yes. Par for the course when it rains for 4 months

 

Oh man, they are asking for some integrated ditch lights.

 

That would be pretty sweet. But there isn’t much room left inside of them with all the stuff in there now!

 

installed a bed rack and our rtt for a trip next weekend

 

Ok maybe someone can answer this I have been trying to see in pics but to hard. Waiting on my LunaRock and thinking about keeping the same side steps I have on my 4runner Pro. Tyger stars. They are awesome steps. Especially the finish on them. But also looking at the GORhino. I think the RB20. Since I’m very anal about detailing my cars and trucks I know some don’t worry about this but I’m looking at when you wash it or polish it where the GORhino’s sit flush where there mounted are you able to get in between the body of the truck and the steps because of cleaning that area. Also the reason I ask I live in Pa and this shit they spray on the roads is not good for any vehicle. Any info or a close up picture would be really great. Thanks.

 

Are you talking about the part where you can see the seam welds? I think all off them have slight gap, which you kinda need on a vehicle that flexes.

5.29s are here, now the painful wait of getting them installed (which is almost a month from now)

 

Hey Downytide, I got my answer from untamed on you tube. I hit him up watching his install. He said you have adjustments with steps how close you put them to the body. That’s what I was talking about. Looking at a lot of pics it’s looks like the step it self is really close. It’s hard to explain what I’m talking about. Basically right below the door sill. Thanks!!

 

I think I know what you mean, on mine (non-Rhino) I just let it sit slightly lower to have larger gap in case I smack into something (which I have). so I can still open the door.

 

Yes it also helps to be able to get in there to clean that area. Thanks.

 

New Member here. Hoping to have my beauty by end of April or beginning of May. Can't thank you all enough for the great pics to help with my decision on this stunning color. Stunning!

 

Fellow PA'er here. The do sit below the door sill and there is a small gap but where the steps come up to the body.

 

I’m really leaning towards the RB20’s but it don’t make sense where some guys have received the bed liner finish which I want but have had issues with them peeling. Man I don’t want to go thru have to sending them back because of this. Might just go with the powered coat finish.

 

Might look at getting them raw and having someone local coat them.

 

I thought about the same thing Casey but then lol I don’t want to go thru all that. I really like the Tyger Stars I have on my 4runner pro now. Had them for a few years but they have been thru a lot of stones have hit them and very impressed with them. No chips or no finish coming off them yet. They still look like new. I feel with them being lower it might take away from our Pros looking lower. There not so much lower it’s the bar that below the step it makes it look like that. Also I need to add them or it’s hard for me and my wife to get in. Just makes it easier. Us guys that are only 5’5. Lol.

 

@RusPro21 and Gass_Passer...
I am also from PA for starters...

I don't want to be a downer here... but I am also waiting on my LR CM... it was due to be built next week (15th and pick up in early April per the dealer). Just receive notice from the dealer that the truck is now going to be built on April 2nd. (great...Friday, everyone wants to get out of work and get the weekend started) So guessing your trucks maybe delayed also...???

Sorry to report this............. But I don't have finger nails left either.

JLR

 

Hey Lemoyne40,
No problem with the bad news. lol. I’m told from my place mine being built March 29th. Just spoke to my sales woman and she said it’s going to be end of April for mine. They just one in last week a guy was waiting for she told me. Also they want to get mine built especially lol because they want my AG 4runner Pro to sell. Lol. Hey Lemoyne where you in Pa at?

 

I've reached the "I don't even want to ask" stage of my order process. I'm sure it's further delayed. I think last I looked, it was showing an end of April delivery, so about 10 days later than original date and right on the 5 month mark since order. I'll probably poke my salesperson again at the end of this month for some additional pain.

 

Central PA...Just East of Clearfield.

 

Not that far from that area. I hit Carlise corvette show every year except last year cause of the COVID. Im around the big Cabela hunting store. Everyone seem to know that place. Always crowded.

 

Patience is the key. Lol. I would rather the manufacturer take there time to build it correctly then just slapping it together. I know it feels like it forever waiting.

 

I was just at Cabela's on Saturday...

 

I figured everyone goes there. Lol.

 

They reduced Tundra's production cause the chip shortage, the chip set is mostly for the safety sense module, the cut back was 40% reduction on Tundra's line for Jan and part of Feb, then it didn't help with the snow storm too, those are the main reasons of the delay, but they are now ramping back up.

Roadmaster suspension showed up, will report back on how it drives, aiming to put them in this weekend.

 

I'm interested to see how this turns out.

 

LOL!!! My build date was supposed to be tomorrow March 12th and I thought the same thing as soon as I saw that 3/12 was a Friday. I guess it's better than a Monday. I need to call the dealer to see if that date has slipped.....if yours slipped 2 weeks mine is probably in the same boat.

 

Cuse93.... Guessing so...but, maybe yours made it in?

 

Spoke with dealer today, expected delivery in Syracuse march 22-25, build date was Feb.24.....

 

I might have missed it in the post. Anyone add the driver side arm pull? I’m looking at getting one from sparks Toyota.

 

I know people go gaga over the handle, but I haven’t missed having one (my 2008 had it). But i also have the steps

 

Hey Casey, So as long as you have the steps you don’t really think you need the arm pull. I think I will add the steps first before the arm pull? I get in my lifted 4runner pro fine with the steps and no arm pull.