TRD Skid plate question?

Do all TRD Pro skid plates come with the red letters?

Some one is selling this plate and says OEM TRD plate but doesnt have the letters

 

Not all. That is an earlier Version, part number

$663 PT93834140 Genuine Toyota PT938-34140 TRD PRO Front Skid Plate

PT93834140.

The one with red TRD is same part number but the last two digits are 90 instead of 40.

I was looking for that earlier version for a while to find one. I don’t care for the offcenter red “TRD”.

 

Thanks Jeff, you think the one in the picture for $150 is a good price?

 

Hell yes. I paid. $250. Mine had all hardware puls the readylift hardware kit. No dents.

 

Missing front bolts but from what I read I can find them at a local hardware store for around $10.

heading over to buy the plate ASAP lol

 

Yes. Get it

 

The one I had installed does have the red letters, newer models do.

 

Does anyone know the front hardware I would need for the plate?

 

https://www.ebay.com/itm/302336233631

 

Or Lowes/ Home Depot

M8 x 1.25 with a 12mm head

 

Thanks Jim, it looks like the skid plate did come with the front screws what’s missing is this one on the left side

hopefully my local dealership has only this part and I don’t have to buy the whole hardware set.

 

5 .......90119-A0169 bolts

3. ...... 52116-0C090 retainers

3. ....... 90159-60440 screws

 

You the man!

now I’m glad I scored this for 150

 

I had one lined up here, some hardware missing and he wanted $350cad, I passed with the missing hardware.

You got a good deal @ $150

 

Anyone know how to determine what size the Toyota screws are?
90159-60440

These are totally rusted out on my factory skid while i have little rust elsewhere. Want to replace with a non-OEM part with better rust protection but the Toyota parts sites have no details regarding size, thread pitch, etc.

 

i came upon an older version Tundra TRD Pro skid plate but the screws holding the oil change panel are jameed in with corrosion.
any tips on loosening it up? I have sprayed and left in WD40 without luck so far.
Thanks!

 

PB Blaster or CLR might work better on that, but it might depend if you have the skid on or off the truck right now.

 

skid is not installed so I have a lot of flexibility. I will have to check in my spray box if i have either of those recommended solvents.
i am still wondering if i should install or sell it.

i will get pics, but the middle mounting hole seems to be gouged as well, although i am thinking a thick washer could cover up that issue.
The corroded screws on the other hand... need to come off before I can install it and consider it done

 

Acetone and ATF mixed.....better than anything you can buy to unseize bolts