USB adapter for Kenwood

I have one last connection to make for my

$999 Kenwood DMX1037S 10.1" High Definition Car Stereo Receiver with Capacitive Touch Panel

Kenwood DMX1037S to get the USB hooked up. I thought the

$35 ACC-USB-TO2 Connects The Factory USB Port and Cable to a Full-Size USB Male Connector in Select Toyota Vehicles.

ACC-USB-TO2 adapter would do it but it does not fit my 2020. Any help appreciated.

 

This one maybe?
https://maestro.idatalink.com/accessories/category/product_id/961

 

For anyone looking at this in the future, the linked product above also does not work. I purchased one in the hopes of it fitting, but no go.

 

Turns out there is no USB adapter for 2020+. I ended up buying a USB/HDMI combo that replaced one of the dash USB connections.

 

I like this idea, have a link?

 

This replaces the left most dash USB - that pops right out and this slides back in and then just plugin the USB and HDMI. The little blue lights help to light the center console up a little too.

$20 Timloon HDMI Socket Mount Cable +USB Audio Input Audio Relay Use for Toyota（Type A）

https://www.amazon.com/gp/product/B07NZNPHH5/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

 

I was told by Best Buy that it is ACC-USB-T01. I'll dig into it and post back.

 

I spoke to tech12volts and he stated that will fit 2019 and below but they made a change in 2020 and no one currently makes a USB adapter for the 2020+ Tundra.

 

Ordered...Thanks!

 

Does this fit into the back of Kenwood DmX 1057XR?

 

It sure does...plugs right into the female USB in the middle of the picture.

For the HDMI the end of the HDMI cord is a little too bulky as the space around where it plugs into the HU is not large so I ordered these too. Some people said they just wedged the cable attached to the socket mount cable or shaved off a little from the edge of the plug. I honestly can't remember if I even tried the HDMI cord on the socket mount as I was DONE at that point - I believe I connected the female-to-female adapter, connected the low profile HDMI cord in and shoved that bastard back into place.

FTR...I have never even tried the HDMI on the HU. Just wanted it there in case I needed later.

$9 UGREEN HDMI Coupler 2 Pack, 4K@60Hz HDMI Female to Female Adapter HDMI 2.0 Extender for HDMI Cables 3D HDMI Connector Compatible with HDTV Roku TV Stick Chromecast Nintendo Switch Xbox PS5/4 Laptop PC

https://www.amazon.com/gp/product/B00A30FELW/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

$14 Cable Matters 2-Pack Ultra Thin HDMI Cable 3 ft, Support 4K@60Hz, Ultra Slim HDMI Cable 4K Rated with Ethernet, HDR Support for PS5, Xbox Series X/S, RTX4090/3090, RX 7900/7800, Apple TV, and More

https://www.amazon.com/gp/product/B00T58JH98/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

 

Whar about the HDMI plug?

 

I'm having a hard time plugging it in.

 

Ehhh...did you read my last post about the HDMI? I posted Amazon products and everything.

 

Nope.

 

Explains why you're having a tough time. You're welcome!

 

What post is that?

 

The one you quoted in post #12

 

Oh snaps! I didn't read it all the way thru.

 

Dude...literally the post YOU quoted in post #12

 

Thanks again for the antena adapter. You're a cool guy.

 

You're welcome! Glad someone could put it to use.

 

While looking for said adapter, I came across a solution on another forum. This adapter is said to work when using a male to male usb adapter to connect to the HU usb. I held off purchasing due to the extended lead time. From what I can see, the plug looks right.