1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Bolt in On Board Air Compressor Mount

Discussion in '2.5 Gen Tundras (2014-2021)' started by Bannock452, Apr 6, 2018.

  1. Jan 21, 2021 at 9:47 PM
    #421
    fisherman951

    fisherman951 MT dreams

    Joined:
    Sep 12, 2017
    Member:
    #9616
    Messages:
    5,345
    Gender:
    Male
    First Name:
    Tony
    SoCal
    Vehicle:
    2017 crewmax 4x4
    It works just fine.
    It works just fine!! @vq35721 has it done
     
    vq35721 likes this.
  2. Jan 22, 2021 at 7:39 AM
    #422
    vq35721

    vq35721 New Member

    Joined:
    Sep 21, 2017
    Member:
    #9808
    Messages:
    768
    Gender:
    Male
    SoCal
    Vehicle:
    2011 040 SR5
    Too much to list

    My 2nd with a 3rd gen intake box

    41E56F77-9B85-4F48-B554-96C4A02561C0.jpg
     
    Bannock452[OP], Trabs00 and 14burrito like this.
  3. Jan 22, 2021 at 9:09 AM
    #423
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    Thanks, looks great! This mount and 3rd gen airbox next on my mods to do as I really need to upgrade to the twin compressor. I have a custom mount over my battery for my ARB single. Works great for my lockers but just takes FOREVER to air up 37s
     
    vq35721[QUOTED] likes this.
  4. Jan 22, 2021 at 6:16 PM
    #424
    vq35721

    vq35721 New Member

    Joined:
    Sep 21, 2017
    Member:
    #9808
    Messages:
    768
    Gender:
    Male
    SoCal
    Vehicle:
    2011 040 SR5
    Too much to list
    You will inflate them 37s in no time lol
     
  5. Jan 23, 2021 at 5:22 PM
    #425
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    If anyone wants a deal on an ARB single compressor, once I get the doubles it will need a new home :hattip:
     
    Pork_Chop_Sando and 14burrito like this.
  6. Jan 23, 2021 at 5:32 PM
    #426
    Tundra234

    Tundra234 New Member

    Joined:
    Nov 30, 2018
    Member:
    #22402
    Messages:
    16,057
    Gender:
    Male
    First Name:
    George
    Florida
    Vehicle:
    2020 Tundra DC SR5 Barcelona
    Alot of them
    Which one do you have? I'm not familiar with the ARB's but I'm looking at my options for a train horn compressor. The Viairs suck.
     
  7. Jan 23, 2021 at 6:36 PM
    #427
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
  8. Jan 23, 2021 at 6:37 PM
    #428
    AZTundra

    AZTundra No Longer a New Member

    Joined:
    Feb 13, 2018
    Member:
    #12894
    Messages:
    4,162
    Gender:
    Male
    First Name:
    Paul
    Phoenix, AZ
    Vehicle:
    2017 White Crewmax Limited 5.7 FFV
    Magnuson Supercharger, TRD Goodies (Pro Suspension, Pro Grille, Exhaust, CAI, Rear Sway Bar, Oil Cap). Weather Tech Floormats, BakFlip MX4, Spray In Bedliner, AMP Research Bed Extender and Bed Step, Side Steps, B&W Adjustable Drop Hitch, AJT Designs Battery Hold Down, SDHQ Sliders.
    Anyone know if the arb duals will fit with the Magnuson airbox?
     
  9. Jan 24, 2021 at 8:34 AM
    #429
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    Technically the ARB twin will NOT fit with the magnuson airbox. At least without some modifications. Mr WhiteSherpa from Phoenix did successfully install the Twin with his magnuson but he had to flip the compressor backwards on the mount. He also did some clearance modifications to the actual firewall. Basically the airbox is just too large to bolt right up.
     
    14burrito and AZTundra[QUOTED] like this.
  10. Jan 24, 2021 at 8:39 AM
    #430
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    VQ,
    Did you replace just the filter housing or did you have to replace other parts of the intake?
    Curious if I can just replace the box and bot whole assembly
     
  11. Jan 24, 2021 at 9:15 AM
    #431
    AZTundra

    AZTundra No Longer a New Member

    Joined:
    Feb 13, 2018
    Member:
    #12894
    Messages:
    4,162
    Gender:
    Male
    First Name:
    Paul
    Phoenix, AZ
    Vehicle:
    2017 White Crewmax Limited 5.7 FFV
    Magnuson Supercharger, TRD Goodies (Pro Suspension, Pro Grille, Exhaust, CAI, Rear Sway Bar, Oil Cap). Weather Tech Floormats, BakFlip MX4, Spray In Bedliner, AMP Research Bed Extender and Bed Step, Side Steps, B&W Adjustable Drop Hitch, AJT Designs Battery Hold Down, SDHQ Sliders.
    Thanks Brandon.
     
  12. Jan 24, 2021 at 9:32 AM
    #432
    vq35721

    vq35721 New Member

    Joined:
    Sep 21, 2017
    Member:
    #9808
    Messages:
    768
    Gender:
    Male
    SoCal
    Vehicle:
    2011 040 SR5
    Too much to list
    You can just replace the full box .
     
  13. Jan 24, 2021 at 4:00 PM
    #433
    Honz

    Honz New Member

    Joined:
    Sep 18, 2020
    Member:
    #52428
    Messages:
    31
    Gender:
    Male
    Vehicle:
    Black 2020 Pro CM
    Decked system Garmin Mini with Dongar Technologies adapter Nitto Exo Grappler 285/70R18 OEM Power Tailgate Lock OEM Black Door Sill Protector Center Console Organizer
    Has anyone here used this mount to relocate their winch control pack? This looks like an awesome solution for that!
     
  14. Jan 25, 2021 at 7:30 PM
    #434
    j_rod

    j_rod New Member

    Joined:
    Jun 18, 2020
    Member:
    #48139
    Messages:
    44
    Gender:
    Male
    First Name:
    Jarod
    Yuma, AZ
    Vehicle:
    2020 White TRD Pro
    Prinsu Rack, Winjet tail light, AJT interior mods
    Looks legit!
     
  15. Feb 1, 2021 at 8:25 PM
    #435
    virgilus11

    virgilus11 New Member

    Joined:
    Apr 14, 2019
    Member:
    #29082
    Messages:
    187
    Gender:
    Male
    Vehicle:
    2022 Tundra Capstone
    1/2" front spacer 37" Cooper ATX
    Hey Bannock,
    I just purchased a Twin Arb and I am looking to install that on a 2020 Sequoia.
    I see that on the Sequoia , they have two additional pipes that are coming out , most likely a/c lines.
    Do you have any idea if this bracket would fit on a Sequoia ?

    Thank you
     
  16. Feb 2, 2021 at 12:08 PM
    #436
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    From what I understand the mount will bolt right up to the sequoia also. I’ve sold 2 mounts to other sequoia owners and haven’t heard that they don’t work.

    Maybe you can post up some photos of the mounting area so I can see. Or feel free to send me a PM with photos and I can get your shipping info also! I’ll send you a mount to try it out.
    Thanks!
     
    14burrito likes this.
  17. Feb 2, 2021 at 5:23 PM
    #437
    virgilus11

    virgilus11 New Member

    Joined:
    Apr 14, 2019
    Member:
    #29082
    Messages:
    187
    Gender:
    Male
    Vehicle:
    2022 Tundra Capstone
    1/2" front spacer 37" Cooper ATX
    Thank you Bannock
    Just sent you a message.
     
  18. Feb 3, 2021 at 5:56 AM
    #438
    chuffaluffigus

    chuffaluffigus New Member

    Joined:
    Jan 12, 2021
    Member:
    #57489
    Messages:
    39
    Gender:
    Male
    Vehicle:
    2021 Limited
    Has anyone tried one of these with a Viair compressor? I know someone used to make a plate to mount a viair in a similar, or maybe the exact same spot so I think there's enough room vertically. Wondering if this mounting plate is large enough to cover the footprint of a viair?
     
  19. Feb 3, 2021 at 6:39 AM
    #439
    azTony

    azTony member since sept, 2017 and over 1,600 messages

    Joined:
    Sep 16, 2017
    Member:
    #9693
    Messages:
    2,529
    Gender:
    Male
    First Name:
    Tony
    Sun Lakes, AZ
    Vehicle:
    *** OV Tune Order #4481 *** ECU 0CN21 ***
    2018 Tundra Platinum with Icon Stage 9 w/3.0 and billet UCA, Harrop Elockers, 5.29 on 37’s
    I used this bracket to mount my ExtremeAire Magnum but I had to bolt another plate on top to allow for another mounting hole the original bracket because it was not big enough. It would only take a tweak to change to bracket to be universal
     
  20. Feb 4, 2021 at 5:47 PM
    #440
    NFARIDI

    NFARIDI New Member

    Joined:
    Sep 7, 2020
    Member:
    #51889
    Messages:
    72
    Gender:
    Male
    Ordered my ARB dual compressor and Bannock mount earlier this week for my '13 Sequoia. Won't be installing for a little while, but will post up when I do. Fingers crossed that it works on the sequoia lol
     
    Bannock452[OP] likes this.
  21. Feb 24, 2021 at 8:18 PM
    #441
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    Does anyone know what the box is that the compressor mount sits above? Previous owner glued something to it and it cracked while I was trying to remove it. I can't find it in any of the engine bay diagrams... :frusty:
     
  22. Mar 4, 2021 at 7:42 PM
    #442
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    For anyone interested I found it!
    Still not sure what it covers but pic with part # below

    20210304_190317.jpg
     
    BlancaLaGordita likes this.
  23. Mar 5, 2021 at 5:50 AM
    #443
    virgilus11

    virgilus11 New Member

    Joined:
    Apr 14, 2019
    Member:
    #29082
    Messages:
    187
    Gender:
    Male
    Vehicle:
    2022 Tundra Capstone
    1/2" front spacer 37" Cooper ATX
    Thank you Bannock, got the bracket and it looks beautiful
    On a 2020 Sequoia , there are two pipes that are coming out from the fire wall that you have to push them in a little. I would wrap some tape aroud them behind the compressor. They will rub against the compressor. The instructions where pretty good also.
    I would strongly suggest that you take some sand paper and clean the corners on the bracket before you start working. It comes out pretty sharp out of the press or whatever is been used to be cut. Another thing that I would do is, open the top cover on the compressor and grease the prong on the two relays before you install it. That was one problem that I had on both Tundra and GX compressors. They rust and compressor will not work. IMG_7317.jpg IMG_7318.jpg
     
    Last edited: Mar 5, 2021
    Trabs00 likes this.
  24. Mar 9, 2021 at 9:11 AM
    #444
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    Looks great!
    I just swapped by 2nd gen intake to a 3rd gen and have my mount from Bannock. Just waiting on my dual compressor to arrive!
     
    Bannock452[OP] likes this.
  25. Mar 9, 2021 at 11:11 AM
    #445
    NFARIDI

    NFARIDI New Member

    Joined:
    Sep 7, 2020
    Member:
    #51889
    Messages:
    72
    Gender:
    Male
    You swapped out just the box cover from a 3rd gen? or the whole intake unit? Do you have part #?

    Thanks!
     
  26. Mar 9, 2021 at 11:46 AM
    #446
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    173
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM
    7" BDS lift King 3.0 Performance series with RR and adjusters 37" Yoko Geo MT Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    OEM Diagram
    I found the full Air Cleaner Box Housing Full Assembly on Ebay
    Maybe try to find someone on here that wants to swap. 2nd gen airbox is bigger than 3rd gen and if you don't want to mount a compressor behind it, why not have a bigger intake?

    Screen Shot 2021-03-09 at 11.31.48 AM.jpg
     
    This site contains affiliate links for which the site may be compensated.
  27. Mar 9, 2021 at 2:06 PM
    #447
    NFARIDI

    NFARIDI New Member

    Joined:
    Sep 7, 2020
    Member:
    #51889
    Messages:
    72
    Gender:
    Male
    thanks for sharing!
     
    This site contains affiliate links for which the site may be compensated.
  28. Apr 19, 2021 at 12:49 PM
    #448
    Rbohno

    Rbohno New Member

    Joined:
    Feb 23, 2020
    Member:
    #43066
    Messages:
    492
    Gender:
    Male
    First Name:
    Rich
    NC
    Vehicle:
    2020 Tundra CrewMax Limited
    Icon stage 5,method 18 x 9, BFG KO2s, Bushwacker flares, tinted windows,Havoc HST running boards,Weatherguard slimline box, DSR1, JL Audio 900/5 amp, two 10W0 subs in a box, hertz centro in the front and Hertz Uno in back doors
    Hey @Bannock452 ,

    Are you still making those dual compressor mounts for 2020 tundra
     
  29. Apr 19, 2021 at 1:31 PM
    #449
    Drainbung

    Drainbung Some days you are the show...

    Joined:
    Oct 30, 2020
    Member:
    #54270
    Messages:
    275
    Gender:
    Male
    First Name:
    Bob
    Oasis of NV
    Vehicle:
    2019 Cement DCLB 4X4
    TRD Fleshlight
  30. Apr 19, 2021 at 6:34 PM
    #450
    Bannock452

    Bannock452 [OP] New Member

    Joined:
    Apr 12, 2016
    Member:
    #3114
    Messages:
    359
    Gender:
    Male
    First Name:
    Brandon
    Murrieta, CA
    Vehicle:
    2016 White Crewmax 4x4 SR5
    King coilovers 35x12.50-18
    Yep still have mounts in stock and ready to ship. I can normally ship same day or the very next business day.
    Send over PM or send a message on Instagram at tundra452 and I can get the shipping info squared away and get your mounts sent out! Thank you!
     
    Drainbung[QUOTED] likes this.
To Top