Chrome Delete Covers for Tundra Bumpers - BumperShellz

I appreciate it! It looked like the liner just didn't want to go quite far enough over the shell to line up. The bolt isn't loose and it didnt hurt anything so I'm not too worried about it.

 

Are you going to put on the color matched bulge/surround? If so, can you tag me and post a pic? I have your exact truck and trying to decide between blacking it all out, or colormatching bulge/surround with black caps.

 

I'm on the MGM bumper waiting list.
I still can't decide on painted or TPO.
Leaning towards waiting on the color matched...

@EC1 any guess on when the MGM caps will be available?

 

Yes, can I see them pls?

 

Things are actually moving along now with the permits which is a huge improvement. I'm shooting for middle of February, but I think by the end of February is probably a good bet. Hopefully it's sooner, but things are officially out of my control as far as that goes.

 

@MatD13 @tomwithatundra

Sorry it took so long guys!! Truck is dirty but you get the idea. It would take an extremely trained eye to pick these things out.

Coming up on 2 years and haven’t had a single issue.

 

Thanks for sharing, they look great!

 

Thanks SP.
I may send you PM on them.
I think with my OCD issues, the color matched may be the way to go.

That is fine and thank you for the response..
I'm going to hold out for the MGMs.
I'll look forward to the email when y'all are ready for me to order and pay..

 

Man this has me even more impatient! I have the exact grill, surround and bulge sitting in my spare room. Waiting for the covers and a garnish to come to throw it all on. Looks great!

 

I had the same exact issues, I'm just going open up the holes a tad to get them to line up.

 

Mine were a bit tough to line up too, everything seemed like it was a very tight fit with little to no wiggle room and a touch small.

In the end, I got the holes lined up enough to get the bolts in but it did take a bit of work.

 

Yea when I dry fitted them it was tight and no wiggle room. I'll test fit again after I get them painted.

 

Sure will when they become available to purchase.

 

I had to trim the backside of my oem chrome bumper so my tires wouldnt rub. Assuming I will need to trim these bumper shellz as well, is that going to be a problem? Anyone else have to do that?

 

Jumped on the waitlist for the trio, in Cement. Still shopping for a CM base SR5, but it'll happen at some point. These look great.

 

We're doing an install next week where we are going to have to do that. You should have an issue. Just be cautious with the cutting tools you use.

 

@BravoDeltaRomeo @1g3tundra2 I'll have to look into that. Should be an easy fix for us. Thanks for the help guys!

 

Finally upgraded from my 01 Tacoma to a Tundra! Trying to figure if I want to go with the Attitude Black color match or just a glossy black. Any pics or thoughts?

 

Does nobody make a lower valence color matched option? Can you please make one and we can group buy it? Or i will test it.

 

I was literally going to ask this same question LOL. Let's see what they say. Although, I do know this part is textured and currently skeptical if any adhesive or tape would stick to it...

I could be wrong...

 

So when you order these does a quantity of one equal both sides of the bumper or just one side of it?

 

They are sold as a PAIR (driver and passenger side).

You pick FRONT or REAR

 

Overall they look great. Are those rough edges around the sensor holes?

 

Any discount codes available out there or sales coming up?

 

Got mine installed!

 

HERE IT IS! Hood Bulge and Grille Overlay

Literally 3 months straight of mold modifications and CNC programming and we are finally here!

 

Awesome. When and how much?

 

I seriously just looked out my office window at the front of my truck day dreaming about this moment. Then I check my email to find this notification.

 

Tomorrow I'll have exact pricing and I'll also have a form to fill out for people interested in BETA testing. We need to get those parts out ASAP so we can have the feedback we need to start the group-buy. We should be able to start the group buy in about 2 weeks!

A note on BETA testing for everyone: I've had a huge number of requests to be in the BETA testing pool. I have some requirements from Engineering that I need to fulfill with the tests, so I'm not sure who exactly is going to fit those qualifications, and there are so few sets we are going to be including in that. Basically, if you've sent me a message, I can't guarantee that I will be able to use that for the selection, so I would make sure and fill out the form as soon as I release the link to it on here tomorrow. I wish I could, but there is just too many, and I just need to get the test parts out as soon as I can. Also, BETA testing will not include OEM color matches other than Super White. Progress is really being made on getting the paint booth squared away, but we can't have that be the bottleneck for these.