Readylift alignment

Anyone have issues with getting a 3/1 kit aligned? Took it to toyota today and they didn’t even touch the caster. Said it was because of the stock uca’s. Will try les Schwab after the tires and wheels goon later this week.

 

3 inches in the front is right at the limit with stock UCA's. Stock setup on these trucks is limited adjustment wise to start with. Just because they get it in the green does not mean it's correct either. Many members do get an alignment that they are satisfied with using stock UCA's, but watching your tire wear is key.

 

I removed my readylift 3/1 for this reason. your alignment will never be 100%.

techs can get it in the “green” on their print outs. But you will always get outside tire wear and your front end will always look like this
\——/

 

May be putting the Fox kit with spc uca's in sooner than expected