2018+ LED HEADLIGHTS PLUG N PLAY HARNESS FOR 2014-2021 MODELS [V 2.0]

Does everyone zip tie headlight plugs? Totally skipped this part. Hopefully doesnt come undone.

 

Is just in case not really needed

 

Good to hear thanks.

 

I ended up PMing iHacker and he fixed me up.
Patiently answered all my over thinking questions and recommended exactly what I needed..

Thank you @iHacker

 

Shout out to @iHacker as well! Got my lights installed this weekend. The harness is top quality and the directions are simple to follow. I had one small issue that was my own fault that he helped me with. Great customer service. If you’re on the fence, just do it!

 

Thank you guys for your support.

Happy Holidays!!

 

Who did you end up buying your lights from?
I want to buy them from @Roman but the store is still down.

Maybe Sparks?

 

Sparks had free shipping but not sure it’s still working.
I believe code was “freeship”

The odd thing was what point you enter the website to obtain the discount.
If it doesn’t work, go into the text chat function and they will give you the correct link.

 

Too bad for @Roman he offers the best service and also is a fellow tundras.com member


In this case I also recommend Boch Toyota South is a Toyota dealership in Attleboro Massachusetts and they offer good deals and service I’ve bought parts from them before


And most all Toyota dealerships offers a 20% off the shipping cost here are the direct links to the TRD PRO headlamps $275.63 each



Right Hand Side


https://toyotaparts.bochtoyotasouth.com/oem-parts/toyota-headlamp-assembly-811100c211



Left Hand Side


https://toyotaparts.bochtoyotasouth...rd-profits-2019-2020-toyota-tundra-811500c211





Use Promo Code: HOLI20 at checkout.

Offer Valid until 12/31/2020, some restrictions apply*

 

sent pm need some upgrades, thank you

 

I just got a 2021 and the LED strip with Halogen bulbs is a joke! Do I only need this harness if I go with OEM Toyota LEDs or will I need it for any replacement headlights I get, like Alpharex?

 

Sending PM

 

So I just finished installing the factory dimming harness and running the test before reassembly. All seems to work except the LED DRL strip is remaining dim, regardless of the headlight on or off. Anyone have a similar issue??

Edit: Found the reason. I used my remote start and tested the lights without inserting the key for takeover. After doing so they brightened right up!

 

PMed to troubleshoot this ^

 

@iHacker I have a 2020 Tundra SR5 with led strip with halogen bulbs. I am about to order 2019 TRD Pro LED Headlights, what all would i need to make the headlights work?

 

Sent you a PM.

 

Successfully installed the '19 TRD Pro LED Headlights with the factory dimming @iHacker harness!

Before:

After:

 

Another happy customer here as well! @iHacker was quick to respond to my questions, and delivered the harness in a ridiculously quick fashion! Loving my LED headlights!

 

Very nice, thank you for posting the pics.

I have the halogen TRD Pro headlights and I bought the same LED headlights as you did to replace them.
Looking forward to swapping mine out, hopefully Christmas day, or sometime in that 4 day weekend.
Being I also have an MGM, I now know what to expect.
I can finally get rid of those chrome end pieces by the amber reflector and that HUGE halogen bulb reflector.



I ended up buying my TRD Pro LED headlights from Sparks.
They were $20 cheaper with 5% discount available than EB Parts with shipping.
I ordered them last Monday evening and expected they would have to order them from Toyota and then ship them.
To my surprise, they shipped them Tuesday (the next day) and I got them Sunday.

My iHacker harness arrived today.
The workmanship is beyond my expectations.
I used to make and sell OEM fog light plugs to Rigid plug adapters and they looked ok.
iHacker's adapters and wiring look better than OEM wiring.

Looking forward to getting this done..

 

They look stellar on MGM!

 

Just wanted to drop another shout out to @iHacker

Pm’d him late Sunday to get an order in. Within 2 minutes he responded with all the info I needed and I sent over all the info and payment. Within 5 mins after that he had a tracking number for me!

shipping looks to be on time, but everyone just remember that this is a tough time for shipping hit he’s clearly doing everything he can! I don’t have the harness yet but I’m already a happy customer. I’ve seen his harness’s on other trucks and they are top notch!

100% would recommend anyone on the fence to not be. Thank you so much @iHacker !!

 

Praying for you and your family

 

Thank you sir

 

I might try to do this swap tomorrow, or at least sometime this 4 day weekend.
Did anyone have to adjust their head light levels?

Do I need to go somewhere and check the levels of my current halogens and then compare them to the installed LEDS?
My garage, driveway, and/or garage door doesn't have a flat enough surface to do it at home...

 

I taped the hotspots on the garage wall and was so excited after the install I pulled the truck out before adjusting anything. I have driven it for the past week and they seem good enough for me. They're probably a little catty wompus, but they'll do until I can find a place to configure.

 

Sometimes you don’t have to do anything and the headlights arrived close the halogen hotspot for a few lucky guys, in my case I had to lower a little bit my passenger light my garage is not levelsl I went to parking lot at night and played a little bit until I got my lights at the level I thought was ok.


Just mark the hotspot in your garage the most further distance possible Don’t move your truck in the process install your headlights, compare and detect any differences and if you need adjustments for a precise leveling you have to do it at least at 25ft on a flat surface.

 

I may go to a store nearby, shine the lights on a wall, and take a pic of the beams.
I have too much stuff in my garage to get an even pattern..

 

Just make sure to take a measure tape with with you and you should be ok, on any parking lot just measure the distance from the floor to the stamped dots in the center of your headlights and then try to math the height in a wall remember this has to be done in a flat surface

 

I swapped my headlights today.

I wanted to retain my amber DRLs without the bright LED strips.
I see Tundras on the road with the bright LED strips and I don't like them.
They are too bright, and I like my old school amber DRLs.



At first, after installation, the Bright daytime amber DRLs were not coming on.
I thought when you shifted into any other gear after start than park, they came on .
BUT, I had the parking brake on.
Once I released the parking brake, I got my daytime amber DRLs.

I replaced the 7440 turn signal bulbs with LED bulbs.
I always liked my 3157CK LED bulbs in my halogen head lights.

Another bonus;
iHacker said the dim LED strips would come on with the headlights, which is what I asked for.
Well, they come on with the parking lights, and that fits my needs even better..

When I remote start the truck (aftermarket remote start), the dim strips come on with the parking lights, my LEDs in the grill, and LEDs in the pod fog lights.
They all go off and I get my amber DRLs when I turn the key on, release the parking brake, put it gear, and get going during the day..

No connector pin switching, no extra wiring thru the firewall or fuse box.

It was literally PLUG AND PLAY..

This is exactly what I wanted..



AND I still have my daytime amber DRLS without the bright LED strips..



It is perfect...

Only problem now is I see how much I need to get rid of the chrome bumper ends...
I'll either get vinyl or the Bumpershellz covers.

And the headlight level adjustment;
I did mark off the spots in the garage before I removed the stock headlights.
The new ones were a tad higher.
I just used the adjustment in the dash to equalize them.
Instead of 2 clicks down from 0, what I got after installing my 6112s with the old headlights.
I now go down 5 clicks down from 0 and they are in the same position as when I started..

I'm a very satisfied customer..

I highly recommend the iHacker harness....

 

Did you get a custom harness, or what option did you get? I'm kind of confused on how yours works. I thought the white strips always came on with the ambers for DRLs no matter which option you had. Also your post in the what have you done to your 3rd gen topic shows you got the ambers to stay on with your lows on? My ambers turn off with lows/highs on, I kind of wished the ambers stayed on all the time like yours does. I have the 2014-17 TRD PRO/SR5/LIMITED Non-Dimming LED DRLs (Bright mode all the time) option on my 2017 SR5.