TRD Pro Grill

Talked to dealership today and they stated that if I bought the TRD Pro Grill it would not work on my 21 SR5, due to sensors? Is there a kit for the relocation of sensors? Are there two that would need to be moved?

Thanks-

 

There are relocation kits available. You may have to have the radar sensor recalibrated although I believe some people have gotten by with putting spacers on the bottom mounts. Some dealerships will deny warranty coverage on the sensor because you modified it.

 

Are you talking about the old TRD Pro grille, or the new model? The new model has the garnish and a place to mount the radar.

 

It may not be necessary but here is the relocation bracket in case you need it:
https://www.ajtdesign-llc.com/online-store/TSS-Relocation-Bracket-10052B-p194252238

 

Courtesy of @2020Platinum on relocating the sensor using a different method:
https://www.tundras.com/threads/2014-2017-trd-pro-grill-mod-for-sensor-placement.79724/#post-2017728

 

You just need the grill and either the OEM Garnish or try your luck with an aftermarket version. With the OEM, it just works, unbolt your sensor, move it to the TRD Grille, put it on. Done.

 

Thank you!...still going strong, no issues at all and doesn’t cost anything to do!...a few of my viewers have done it as well since I made the video and not a single issue!

 

They are wrong!
2019+ TRD PRO grill will work. You take your sensor off your stock grill and attach it to the PRO grille. If you go OEM you need the grill,sensor cover and 2 screw nuts. No recalibration needed.