2021 TRD Pro w/ readylift fitment?

Hey all, new to the forum, and I'm picking up my 2021 trd pro soon. I want to add the 4" readylift kit, and I'm trying to figure out my options as far as keeping the stock 18" pro wheels. I know I may need to do some bmc but would 35x12.5 clear this setup on stock pro wheels? Anyone have experience running 35x12.5 on stock pro wheels?

 

from the install instructions- This suspension system was developed using a 35” x 12.5” (6” lift) and 37” x 12.5” (8” lift) tire with 20” x 9” wheel and a offset of +25. If wider tires are used, offset wheels may be necessary and trimming may be required. Factory wheels can be used but are not recommended with tires over 11.5” wide.

You will also be cutting the cross member and throwing out a section of it. That alone would deter me from this kit on a brand new Pro, no way I would cut up a brand new truck like that.

 

the readylift +2 which equates to a 4 inch lift on the pro's does not cut the crossmember.

 

Yes, OP said he wanted the readylift 4, which does require cutting.

OP- you do not to add 4 more inches of lift to clear 34/35 inch tires. There are folks running 35s with 2.5-3 inches of lift up front total.

 

Need more info op!

 

That TRD Pro plus 4 will actually be a 6 inch lift. I have the TRD pro plus 2 and it is a 4 inch lift. I also have 1.25 wheel spacers with stock rims running 305/70r18 Cooper STT Pros with no BMC

 

They need to work on there website then. I understand u get double what the spacer is. So is it 8 inch lift with 4 inch spacer?

 

It is 4" plus the 2" already on the front of the Pro which will equal a total of six. Mine was the plus 2 so it gave me 4 up front and a 2" block for the rear.

 

I get what u are saying op should know this! So for your model is 4 inch.

 

Wescott designs pro lift will allow you to fit 35s much cheaper...

that’s the route I plan on taking. Someone posted up a wescott lift with cb +3 shackles a while back and to me it was perfect

 

My bad. i saw the posted pic of the lift and thought it was the OP.
Yes. The ReadyLift SST Toyota TRD PRO Plus 2. It comes with a 2 inch top plate that replaces the original top of the coil over and a 2" block for the rear.

 

OP do the TRD Pro pls 2" which will give you a 4" lift over factory. You can clear 35s. Thats what I'm running for now.

 

Welcome from Gettysburg