What have you done to your 2.5 gen Tundra today?

Just lift it from the bottom to start and it should come right out. @2020Platinum has a video on his channel.

 

+1.....interested as well.

 

link to where I can get some please love the look

 

Yes, I watched his video and his just came right off with no resistance. Mine feels like there's something else holding it in place. Didn't want to break something. I'll try lifting from the bottom next time.

 

My first experience with vinyl. Blacked out TRD wheels.

Before


After


Not as good as new rims. But huge improvement over stock IMO. Took about 3 hours using wet method with rapid tac and finishing up with a heat gun to knock down the edges.

 

Looks great!

 

Make sure the torx screws are as loose as possible (remember that they are captive so they won't come all the way out). You could try wiggling it a little and see if it comes out. @2020Platinum, any other ideas? I wouldn't think the 2017 would be any different.

 

Thank you Sir. My 10 y/o that helped out today said it looked 'BA'.... not sure where she learned that, but I took the compliment. Lol.

 

Kids hear everything lol!

 

Nice work. I’m looking to do the same mod, any idea where I can find detailed instructions on how to wire these like you did?

 

Now this looks like something I would see in Alabama daily...lol. my favorite was a mattress in the bed of a truck with a guy laying on it...

 

Looks great. I was talking with my son today about wanting to switch mine (same as yours). Do you mind sharing details on the process and where you bought the black levers? I'll search around on the forums too.

 

Yea the only thing holding the airbag in place are those 2 screws, like @Tundra234 make sure they’re all the way loose, they can’t fall out on ya...if they are then it should just come right out but try wiggling it a little...let us know how ya make out!

Yea that’s about all I can think of, should come right out!

 

I have a video on my channel showing how to remove that entire panel to customize or replace handles, and trim if wanted!...hope it helps!
https://youtu.be/CkwrSuYg6xY

 

NOCO Genius 5 amp battery charger with AGM mode

No issues with the X2 Power. Just wanna stay on top of it and get the most out of it.

 

Great video! Thank you so much for sharing. I want to black out all the shiny chrome pieces on the interior (doors, vents, cupholders, etc) and your video should be a big help!

 

Here are the part numbers I used.


692060C040 Interior Door Handle (Left, Front, Rear)
692050C040 Interior Door Handle (Right, Front, Rear)

 

No prob!...I also have a video on the channel showing the complete disassembly of entire dash for customizing, let me know if ya need any help with any of it!
https://youtu.be/xu1C1AapaAI

 

Always like seeing your photography . Nice edit on the intake photo!

 

Finally got this thing installed. I molded in a custom switch plate by CN designs with epoxy and bondo glass. Sanded off the texture, and made it all one unit.

Also installed a front camera setup from Anytimebackupcamera.com.

Then treated the truck to some Beadmaker. First time I tried this stuff. It’s amazing!

 

Thank you sir!

 

Some much needed protection for the ABS sensors.

Front ABS sensor guards


Rear ABS sensor guards

 

Looks great! And that blue is poppin! But damn...how much bead maker you use? Haha

 

Where did you purchase the ABS sensor guards?

 

Finally washed her since the start of the Bobcat fire. Washed and covered!

 

Got backed into this morning by my mom and she was driving my dad's new to him used Lexus suv.

 

Ouch