front coil assembly + spacer DFW $40

pulled at 33K miles. Factory coil/strut assemblies with 3” spacer installed. Pickup only in Dallas/Ft Worth area.

 

Bump to $60

 

someone, anyone?

 

What did you replace with? I’m in DFW and might go to collin county off-road to put in 6112’s or just go fox

 

toytec/eibach front and eibach shocks on the back. Left 1” rear block in for a tiny bit of rake.

 

How’s the ride? Did you do it yourself?

 

Ride is way better, especially on the highway. I did not install myself, friend who’s a service manager at a dealership hooked me up. However, when they installed they noticed previous installed had broken off a nut weld on the lower control arm where it connects to sway bar. Same sway bar that had backed the top bolts out a month ago was loose against i took it yesterday to epic off-road in Lewisville to have that fixed and have another alignment done. It helped with my loose steering.

 

It sits lower now than I’m used to, because I drove it 2 years with the 3” up front. But I have noticed better MPG with the slight amount of rake and like I mentioned before the ride is noticeably better.

 

Dropped to $40 but I really want them out of the garage. Hit me up if interested