What have you done to your 2.5 gen Tundra today?

^^^This appeared to be faster... as yours have arrived already.

I did a PM here @rrentrop

 

Some key fob action

 

What's the brown/rust colored piece (with the blue mark on it) immediately above the top of the spring coil in this pic?

 

Nice bottle opener!

 

Not sure it deserves an entire write up but the quick version is:

1. In the bed there is a Yeti 400 that I can power from 12v (see #2), solar panels (100W on tonneau cover and 2 other panels I can deploy if needed) or from AC power (#3).
2. 12v DC power runs from main battery to bed. Ran above frame rails to left corner of bed (from rear looking forward). This is 12v always on power (not ignition switched) for the Yeti 400 when the truck is running (their 12v battery charger for the Yeti has battery run down protection in case you leave it plugged in).
3. AC power comes in from the shore power plug in the bumper and a 3 outlet powerstrip in the bed connects to this. The Yeti 400 AC adapter plugs into this so when I plug in an extension cord off it goes to charge.
4. My Dometic fridge plugs directly into the Yeti 400 and is fed only off 12v power (although I could also plug the Dometic into the AC powerstrip as well and it would runoff that when I connect shore power and switch to DC when it needs to .. I might as well do this).

PM me if you have any questions and i'll do my best to help ya out!

 

What's the deal with the key fob?

 

I like how you think.

@Roman that's what you meant, right.

 

Great idea.

 

Sorry.

 

Send him a PM.

 

Thanks. Got it in 2017 when I had my 17 Cement TRD Pro 4runner. Its from a company called yotateq. I don't think they make it anymore though.

 

It's just cooler looking then the OEM one.

 

69 Panels and almost 17kW. With 3 teen girls,my in-laws living here, and every single appliance being electric, my bill is about $17 this month.

 

Yeah, I found yotateq but most their stuff was for the Raptor. I did find these though:
https://keychainguy.com/bottle-openers

 

Ho-lee-sheet

Ever think about putting in a couple Tesla batteries or similar?

 

I like it. Where can it be found? Thanks

 

How come there are two washers stacked together? Is it supposed to be like that?

 

haven’t yet, definitely compiling. working through getting this build functional for an upcoming trip.

 

whats your suspension and tire set up? Im in sac as well. Will throw a if I see ya.

 

He sent me an invoice same day I messaged him.

 

We should get an San Antonio members run organized. I'm on the NE side but work need the rim

 

https://www.ajtdesign-llc.com/

 

I’m in from the Fair Oaks area.

 

I’m in SA too! Surely you’ll share?

 

Gave the truck a good detail today. Used Meguiar's ceramic wax. I like it a lot. It goes on easy and dries in 10 minutes. I am sure it's not the best ever, but it works well for me needs. I drive on gravel roads a lot so my truck will never be the mall crawler.

 

Rep our club member decals and my Vision TRD rims

 

Thanks

 

Decided I liked the black door handles enough to pull the trigger on color matched. My vinyl job just isn’t going to work on a new truck. Should be here within the week.

 

Sorry, I get those 2 mixed up. I've never been back in there, but one Saturday a while back saw the Tundra club (SATC) lined up going in as a group. Looks awesome back in there, and good open spaces are hard to find

 

I want that for my grocery snatcher!!