What have you done to your 2.5 gen Tundra today?

Thats the one!

 

shifter and cup holder chrome delete thing, where did you get that? that chrome shit sometimes blinds my eyes when i hit the sun just right.

 

thats awesome

 

I'm pretty new to the forum, like two months new, but I would take a look at taco tunes

 

https://www.ajtdesign-llc.com

That was the main problem why I did it.

 

There are many write ups in the audio section. I lot of us got our systems from James with tech12volts.
I have a 1794 with the factory JBL system too. I removed the stock amp, speakers and sub. Replaced with a DSR1 digital sound processor, JL amps, JL speakers and 2 10" JL subs.
A sound processor is required for factory JBL systems, the DSR1 has a plug and play harness to read and decode the signal from the headunit.
The JBL headunit does not output a nice flat signal either, so you cannot use line output converters after the factory amp.

 

Used a clamp from an old tonneau cover (happened to match my current clamps) and a piece of flat stock to bolt up an essential bottle opener.




On the bottom bolt I stuck a strong magnet to grab the caps as well.

 

I have a problem with bottle openers.

 

I thought having a dozen or so was a lot... damn!

 

Belated welcome from NY.

 

Nice collection !

 

Cleaned and detailed after a 2400 mile trip visiting my parents with my daughter and 14 month old granddaughter.
was interesting, someone didn't follow the safety rules of
1. no crying in grandpa's tundra
2. no pooping in grandpa's tundra
3. no throwing food in grandpa's tundra
4. no throwing up in grandpa's tundra

 

Small change, swapped out my RAM arm for the 67 designs one. Way more adjustment.

 

Hello, I’m new to this group. Traded my Taco for a Tundra because my kids are getting so big and the Taco just didn’t have the cab space we need. I wasn’t satisfied with the looks of the Tundra until I swapped the 20in platinum wheels to the TRD Pro ones. Here’s what I have done to my 3rd Gen today!

 

Welcome from NY.

 

Did you swap tires also or are those still the stock size. I'm still searching for those wheels but everyone wants $2000+ with tires.

 

I did a little painting today. Used VHT Plastic paint.

 

Yota LEDs

 

Outstanding

 

Got her windows tinted this morning

 

Tore out the rear seats and started to build out tool / dog storage. It's a bit too high but I will change that cause it needs to come back out so I can install sound deadening mat. Eventually it will have front and rear walls for his protection, and carpeted for his comfort.

 

At that height, you could make a pull out ramp the width of the cab for your dog to get in and out. Like the hidden ramp on a u-haul trailer.

 

I may need to get this. Which length did you go with? The Ram arm only come in A) too short and B) too long

 

Technically yes, but he's a heeler. He jumped up no problem on the second attempt.

 

Wash Day....

 

I found the wheels with stock michelin tires from facebook marketplace for $2,000 but talked him down to $1,700. They were brand new take offs. Probably had less than 100 miles when I got them.

 

Congrats!

 

looks good there!

 

Thank you.