What have you done to your 1st gen Tundra today?

Ok, let's try this one more time.

 

Are we going in?

 

I have no clue what you guys are doing.

 

Me neither. But when in Rome....

 

It's the old Tundras.com Tundarooni!

Hold my beer fellas, I'm goin' in!!!!

 

Katanas just came out with a newer fan less bulb. Plugs in just like the incandescent. No wires. No drivers. $49.

 

I bet that fanless bulb will burn out even faster than your other sets. My fanless LED fog lights lasted about 100 days.

 

Bummer. My LED Fan Less Fogs (PerfectFit from HR) are going on 2.5 years strongly. The headlamps that burned out on me went 14 months. I think the fans gave out and couldn’t cool properly. Ended up making the chip go into self dimming mode.

Side note: I’m starting to notice LED Projectors Units popping up more often on Big Gurrl.

 

Tried this product. Shine is nice. Waiting to see how long it beads water

 

Thought it was a beer at first. Got excited. Womp womp.

Truck looks good. I was just watching a video on that product 2-3 weeks ago. Supposedly is good to go 3-4 months.

 

She is glossy! Looks great. How easy versus wax?

 

Same effort as a good wax. IMO

 

Project farm on YouTube just did a ceramic coat test side by side with different brands. Pretty good watch.

 

Oh crap okay

 

LOL, I had the same thought: "what beer is this??"

 

I thought it was one of those fruity kambucha drinks that my sister in law loves. Beer shouldn't have such a colorful can

 

Big thing with these new coatings is how long they last. If you would post back.

 

Still good as of this morning. I’ll fill you in on the progress at six tonight.

 

Deep cycle feather dusting with 303. THIRSTY!

Fog backlight success.



Working on the clear lens now. Only one really bad scratch in an out of the way area. No biggie.​

 

What size was that bulb

 

NeoX 3mm from superbright leds.
Added white tape for improved reflection.

Did not change CEL, Low fuel light, or battery light.

Battery light was dimly lit with LED even when the light was "off." I suspect the airbag light in bottom left is doing the same thing.

 

I'm curious if a resistor could be added to an LED to make the low fuel light, and check engine light work.

​

 

Sorry for confusion. What I meant was I would like to know how long it last to bead water.
Most waxes seem about 3 months. Then you have the true ceramic coatings. That are expensive 2 part products that can take 8 hours to properly prep & apply.
Now seeing what looks like you used, What maybe a compromise between the two.

 

Probably. All it needs is a specific resistance as it's part of a circuit.

 

You're so thorough! Thanks for the idea of restoring my gauges with 303.

 

Thanks!

If you do what I did with the 303, be extremely careful around the guage needles. They are sensitive.

That wasn't a rub down job like the engine bay, that was true feather dusting. Delicate!

In hindsight, I probably should have used the 6600k cool white led for backlight instead of the one I used which I can't remember off hand right now.

 

Took my niece with a week old learners permit out to pick up firewood.

 

That's awesome! My daughter got a few lessons in my truck about a year ago. She really liked the truck, even with its laundry list of flaws.