285/70r18 Ridge Graps on stock TRD off road wheel

Is anybody running the Nitto Ridge Grapplers in 285/70r18 on the factory TRD +60 offset Off Road wheels? Seems like this is a pretty uncommon size and I can’t find a lot of fitment info. What would I have to do to make these tires fit? Level, trimming, etc. My plans were to do a 3/1 level. What do you guys think? Pic is my 100% stock 2020.

 

Im looking at doing the same. Anyone?

 

I have 5100 Billsteins at top setting and have 295’s. Just a simple leveling kit and you can install 285’s with no issues.

 

Possibly not helpful at all, but I have 285\70\R18 EXO grapplers on my 2014. I have about a 3/2 lift with king coils up front and shackles in the back. Mine are on Method Roosts though which I believe are an 18 mm offset

I like this tire size, but yes it is not very common.

 

Would the +60 offset have him close to the UCA? I run 285/70's but I'm on a 0 offset and a lift.

 

My Brother just put cooper stt max 295/70/18 on his 1794 they barely touched the skid plate and front mud flap! Clear the UCA by about 3/8 of an inch. Easy fix remove the front mud flap trim the skid plate. With no lift..

 

With the 285 he would be fine with UCA clearance. My 295s are very close to the UCA by about a finger width which is a little to close to comfort for me and I am running with the PRO wheels which are same offset of +60.

 

What kind of lift/level are you running? New Coilovers or spacer lift? 2” I’m assuming to level.

 

I am running Billstein 5100s front and back. Front is on top setting which is 2.28” of lift. Leveled my truck perfectly.