What have you done to your 2.5 gen Tundra today?

First attempt on vinyl wrapping

 

Nice job for 1st time.

 

Can someone tell me the kit that comes from sparks to add the grab handle to the driver's side, are those pieces the same that would come from a 2007-2013 tundra? I want to do this mod and found a used one for half the price but I would need to get whatever hardware is needed. I just basically want to know if it's the same thing before I go buy it. Thanks

 

I believe it would be the same, but if you check the first post here https://www.tundras.com/threads/ultimate-oem-toyota-parts-thread.10707/ you can get concrete info on it, or ask Roman. He is the OEM Parts God.

 

https://www.tundras.com/threads/for-those-with-no-driver-side-interior-grip-handle.4433/#post-65922

 

Thanks Jim!

 

I built Mine and ran them off the 3 lights. Ran them all to 16ga and loomed it and fished through the hood and back into the fuse panel.

 

Option1: wait till next week to deliver to my house or option 2: go pick them up......option TWO. 33” tires on 20x10 rims, option ceramic coating and wheel locks

 

Just reviving this post from March as I recall others being interested in this specific USB as well. I love the look of this USB for the rear part of the center console. It looks pretty much like a factory part to me compared to a lot of the other USB's on the market. I had been following up with Headlight Revolution for a few months now as they were trying to see if they could sell this USB separately, normally it would be an add on option when buying the Knight Rider NSV LED Light Bar. It sounds like they planned to for a while, but it still hasn't made it to their website yet as they are prioritizing other tasks. Headlight Revolution did notify me on Monday after I followed up again that while they still don't have the USB live yet it is available from TRS who has a live link ready to go. I purchased the USB from TRS and it should arrive today. I'll post up some pics once it's installed!

Link to TRS: https://www.theretrofitsource.com/NSV-Dual-USB-Charging-Port-System-Universal?quantity=1

Huge thank you to Headlight Revolution in keeping tabs with me over the past 4 months just for a simple USB. While they are not yet able to offer it, they provided me with the link to purchase from TRS - that's customer service!

 

Over the past week I threw in a Switch Pros 9100s, TRD Seay bar, Decked drawer system, some pillar post lights, and tow mirrors.

 

I got mine from a junkyard from a 07-13 and had to trim the bottom of the panel to account for the speaker wire bundle. Other than that, they're the same.

 

any pictures of it ? where exactly is it ?

 

where do you stay ? if we stay in Destin and not in Miramar Beach we stay at the Emerald Grande but it so busy there now !

 

Had new Topper installed and got a spray in bedliner in the same day. When I got it back home, installed Weathertech side window deflectors.

 

Photo Op

 

Celebrated passing 20k miles by adding the Tundras.com decal!
(I know it's not a lot of miles but I'll take what I can get lol)
@Bob thanks for ensuring I got this. I know there were issues but the truck looks better now.

 

Very BIG day today...



PAID IT OFF!!!



My goal was to get it done before 30k miles...just in time!!!



Now I can enjoy the next couple decades with no payments, woohoo!!!

 

I've got some Icon Compression wheels coming, and am looking for tires in the same size as yours. How do you like the R/Ts? Would you buy something else next time around? Do you have pics of this setup on your truck?

 

Looks good. Glad it worked out and you'll get use out of it.

 

How do you like that swing case? I'm really considering it. Can it be easily removed if you need more space in the bed?

 

Installed ESP (under) rear seat storage system. I took out my Weathertech full coverage rear floor mat first, then cut the carpet and foam using the supplied template. After making sure the ESP plastic insert fit correctly, I put the Weathertech mat back in and measured from the rear wall of the cab to align the template correctly with the cut outs and cut the holes in the floor mat. Then I vacuumed out the holes thoroughly and installed Kilmat sound deadening to the floor of the cab where the foam was removed. All in all an easy job and the ESP system fits great on top of the Weathertech full coverage rear mat.

 

Finally got the flare video up and running...including install of the paint protection film, hope it helps!...as always shoot me a message if I can answer any questions!...next video up is the Nfab M-RDS front bumper with light bar, pods, and parking sensors!...getting super close to 2,000 subscribers and the next big giveaway!
https://youtu.be/6Vi9D_poqKY

 

Silver Beach Towers great place for us.

 

Thanks Ron!!... I appreciate that!!

 

It's great, I don't have any storage underneath my seats and I have two car seats, so I moved all that loose stuff to the swing case. They're easily moved, you just lift it off the hinge and the hinge/mount hardly takes up any space once removed.

 

I was looking in to installing these but chose against it for the reason being I'd have to drill holes in the side of my truck bed. For me that was a deal breaker.

 

Yes, unfortunately you do have to add 6 holes into the bed and remove the factory tie down. I'm not planning on removing the mount anytime soon, so wasn't a big deal to me.