Can not remove OEM tonneau cover PK3B134H5H

I just had a tonneau cover installed at the dealer. It says it’s removable but I cannot get it off. It appears to be stuck to a strip of adhesive foam along the back of the bed under the back window. The whole reason I bought this one was because I need to haul my dirt bikes and it’s a crewmax so there is not enough room with the tri fold folded but still attached. I can get the pit bikes in but not my trail bike.


https://parts.toyota.com/p/Tonneau-Cover/69549541/PK3B134H5H.html

does anyone know if those are removable or am I going to have to take it back.

 

Here’s a photo

 

Did you remove the bolt under the plug on the passenger side at the front?

 

When I take mine off I do one side at a time I fold it back I lay on my back and pull the string on the left and lift it lay it on the track then i pull the string on the right side then it comes off it’s a little PIA but not horrible once you do it the first time it gets easier

 

Did you remove the bolt under the plug on the passenger side at the front?

There is no plug. You mean on the top
Outside? I saw some like that but mine doesn’t have one

 

Does yours look like this?

 

If you dont have the plug then yours is a different style. Is yours a genuine Toyota cover?

 

I don’t see any strings but there are two cables

 

My hardcover isn't a genuine Toyota cover.

 

Let me see if I can find the instructions from infostream.

 

Yea that’s it u need to pull 1 at a time and lift

 

Here: https://m.youtube.com/watch?v=f5vcg1m3I8k

Check out about 1:20 in the video

 

Thanks so much. I’ll give it a try tomorrow.

 

eddie_773’s video should do the trick.

 

No problem. That video is the Tacoma, but appears to be the same factory tonneau cover you have. That video should guide you through the process.

 

Here is the Toyota instructions if you need them.

 

Thx

 

I notice every time we get a heavy rain my cover leaks near the tail gate it appears it's coming in from the side where the small weather stripping is. Does anyone know of any ways to add additional weather stripping? Possible the entire length of the cover on each side?

 

Does anyone know if this cover will fit a 2015 PRO? I have it on a 21 PRO currently but want to put it on my sons 15 PRO because I bought a bakflip for the 21 so I’d have extra space if needed. I thought I saw where this fit a 17-21 so I wanted to make sure. I thought the 15’s were the same.

 

14-21 all have the same bed, so it should fit.

 

That’s what I was thinking. Thanks for your help.