What have you done to your 2.5 gen Tundra today?

this looks awesome. Did you do the 1.9" setting on the 5100's? anything in the rear, and any need for new upper control?

 

Finished installing readylift 3/2 and carrier bearing drop kit. Time to decide on wheels/tires now.

 

Got the ArmorFlex installed this morning, used the upper hole for the drain hose to keep it clean. Time to work on maintenance for both vehicles now

 

Thank You! I set the 5100s at the top setting which is 2.28” of lift. This setting perfectly leveled the truck. The only thing additional that I added was the 5100s in the back so no lift in the rear. No need for new UPC. Just the 5100s and removal of the front mud flap in front of the tire and a little trimming of the skid plate. That is all...

 

and no alignment issues or ride quality. People keep saying new upper control and I really don't want to spend all that money. It is mostly a pavement rider.

 

It's been purely cosmetic changes for a long time basically, some tech stuff like the 2020s have Carplay.

 

Liking the height, but it does make the stock tires look too small now.

 

No alignment issues, TSS issues or drivetrain issues or anything negative. Love how it handles, rides and looks.

 

Which rack is that? Link please..looks badass!!

 

Are those 18s?

 

Been thinking about getting one for my truck. Do you have any other pictures from different angles?

 

No 20s...... will be going 18 tho.....want some more meat to soak up the bumps

 

Awesome, was wondering as I have 20s and the factory Duratracs that came with the TSS package, gives an idea the look. Thanks.

 

Damn, I was going to install the rear TRD sway bar, but the fedex delivery says "returned to facility for inspection." They must have dropped it off the truck or something...

 

Oil change and changed the brake fluid with some DOT4 completed. Retreating to the AC of the house, 90+ degrees and 50% humidity

 

Finally got around to installing my wireless charger and cleaning out my center console as you can see from the pile o’ crap on my table.
Works great, only took an hour. Dealership went batshit with the armorall so now I have to clean the smudges off everything, its even on the bottom of my damned feeties from the rear floor mats.

 

Got the rears and coachbuilders installed this morning..took me almost 2.5hrs..

 

I was looking at the same step, but the price is what holding me back. If you don’t mind me asking...Where did you get yours from ?

 

3rd gen sheet metal mainly.

 

Does this cover require re-locating the stock rails?

 

Today I did this,

 

Holy shit that looks painful.

 

Finally got off my butt and finished installing my Midland GMRS radio as well as the antenna wiring. Set up a low profile antenna on the hood using a Nagoya lip mount I had laying around (also replaced my Diamond dual band on my Yaesu with the same for normal around town use). I need to fix the power wiring and hard wire it instead of the cigarette lighter adapter it comes with. Have some Anderson ports under my seat that power the existing HAM radio just need to make a cable to reach the Midland. Nice thing is now if I want to use my Kenwood TH-D72 or another handheld in addition to the Yaesu mobile I can in the cab with the external antenna and adapter. Might be a cool use case as a mobile crossband repeater?

 

Hitch won!... ouch man.

 

What size are those tires? sweet rig!

 

No, but you have to remove the rail cleats as they will not fit

 

Big ass...lol

 

37s