MattGecko LED Bed & Hood light kits

MattGecko LEDs
Lighting up Toyota's since 2012
Page and pricing updated: May 2025



https://mattgeckoleds.com


Waterproof LED HOOD & BED light kits
MattGecko LED light kits come mostly pre-assemble and are designed for the non-DIY (electrical newbie) to the experienced installer. Everything that you need to install the kit is included (except basic hand tools) and includes easy to follow installation instructions with lots of pictures. I use super bright 5050 waterproof LED light strips, all connections to the LED’s are soldered with shrink tubing over the connections. Light strips come with upgraded "high strength" adhesive tape and heat shrink crimp connectors.

Fits 2012 - 2021 Tundra's with bed tie down rail system.

In Stock:
SINGLE COLOR: Cool white 6500k, warm white 3500k, red light LED's.
DUAL COLOR: Pure white 5,000k / Red
Special order: Blue, Green, Yellow, Pink, Orange and UV Black Light.


I accept Papal or mailed payments.
If you would like more info or to place an order please click "START A CONVERSATION" (PM / Private Message) under my user name.


Fits all Tundra's that have the bed tie down rails.

• LED BED LIGHT KIT
Pre-wired (3) LED strips with "upgraded" adhesive backing tape, long power wire, zip ties, adhesive squares, bed mounted waterproof toggle switch & switch boot cover (single color) or 3-wat waterproof switch (dual color), in-line fuse holder / fuses, heat shrink connectors & easy to follow install instructions with lots of pictures.
Single color: 5' Short Bed $93 / 6' Long Bed $97 / 8' Extra-Long Bed $101
Dual color: 5' Short Bed $114 / 6' Long Bed $116 / 8' Extra-Long Bed $118
Includes USPS shipping with tracking number - USA (CANADA Add $18).



• Optional - Hood Light Kit (single color only)
Pre-wired (1) long LED strip, push button switch and parts bag.
Purchased with bed light kit $51.00 / without $65




Pure white / Red (dual color)


Warm White

Warm White

Cool white

 

Cool White

Cool white

 

Looks good! It appears that they mount underneath the bed rail system, is there a recommended mounting point if you don't have those? Also if you have a toolbox that would block the front light, can you purchase just the sides?

 

The light illuminate the bed best when mounted under the rails. A tool box with a bed that has the rails works as the lights light up under the box.

I am happy to customize how ever you would like.

Here is a local TacomaWorld members custom job I did:

 

I don't have any of a Tundra but do have a pic of Chevy full size.

 

Some sweet photos right there!

 

Your are the man for providing all those sweet photo's! Also the Tacoma cover photo on my install instructions.

 

For the hood, do they just stick on underneath it? I worry, due to the elements, that they'd come off and fall into the engine bay. Any thoughts? You mentioned it comes with a hood pin, I'm sure that could easily be changed to a standard rocker switch, huh?

 

I replace the tape that the lights come with adding a high strength tape, the failure rate is extremely low. Yes the hood light kits include a hood pin switch that is mounted in an existing empty hole.

This was my first hood light kit back in 2012, lights are mounted directly over the engine/supercharger. Lots of heat and they never came off. I changed the mounting location to the top of the hood becuase the LEDs are a little blinding.

 

So the $60 comes with everything you need; lights, wiring, switch, etc.? How do you power them, just direct to the positive battery and then a ground?

 

Yes the inline fuse holder gets wired to the battery, the ground gets wired to the hood pin switch.

If you would prefer a regular switch, i can substitute for the hood pin switch.

If the hood light kit is purchased with bed light kit, the hood light kit is $50.

If the hood light kit is purchased by itself it's $60

 

We're going to have to figure something out for when my 4Runner arrives

 

Do you have pics of how the leds tie into each other and a layout of the wiring harness/switch setup?

 

If you PM me your email address, I'll email you my install instructions for your review.

 

I'd like this info as well. Interested in a kit but want to know exactly what I'm getting into beforehand

 

PM sent.

 

I like this.

 

I can definitely vouch for these. I bought a kit from Matt for my Tacoma about 3-4 years ago and it was top notch. Emailed him and asked if he made kits for Tundras and he did. Ordered a kit and he mailed them out the next day. Really good guy to work with and his lighting kits are awesome IMO

Looking forward to installing these next weekend!

 

So I installed them last night and it went well. Having a pro, the dual exhaust makes it a bit harder to install the switch and ground, but nothing major. Ran the power cord along the brake line up to the engine bay. The switch for me was prob the hardest part. Have to get the switch in blind basically and its a good way up the fender, but I really like where the switch is mounted- nice and tucked away. Overall I'm very happy with it, thanks again Matt.

 

That looks great @scpete24 !

 

Just gonna put this here because @mattgecko I hope to be on both covers of your bed light install manual...

 

Thanks for sharing your pictures and feedback guys!

 

I have kits in stock!

 

Waiting on the arrival of my new CrewMax Pro... so you know what that'll mean in a few weeks... just giving you the heads up.
HaHaHaHaH.

 

@Krezz
I'm about to copy you. Which color did you get?

 

Honored! The cool - and will be getting another set once the new truck arrives!

 

@mattgecko
As far as output, which is brighter...the blue or cool white? I love the @Krezz mobile look but i also want a bright light. Also, how far off is the difference in color of those two. It doesn't look much different in the photos. I'm leaning toward the blue but your OP says special order on blue.
I'm going to purchase, i just need the info before i commit to a color.

 

Sorry I edited my post but not quick enough - I have the cool white color, not an actual blue light. The blue truck makes it look bluer than it probably is.

 

OH...then nevermind. i don't wanna copy you after you lied to me

 

hahahahaha - It was a "white" lie