20” with 35’s?

I have a 2019 Limited CM. Looking to keep the OEM stock 20’s on it and run 35s. I am installing a 3” Rough Country leveling kit. I was planning on running 1.25” Spidertrax Spacers. Would 35s for without trimming the body mount or skid plate?

 

start here https://www.tundras.com/threads/largest-tire-you-can-run-stock-for-all-generations.9762/

you will be trimming

 

i think the stock limited 20" wheels are 20x8 +60mm offset. the offset on 1.25" spacers is 31.75mm. so, you are looking at a total offset of +28.25mm.... which is not that bad, however, you will be doing some modifications to run 35's. lets see... remove front mud flap, remove front spat, modify from bumper liner (trim), bend/cut skid plate, maybe body mount chop, and maybe push front bumper forward 1/2".

here is what i did to fit 34's on a 3.5" lift with a +20mm offset wheel:
https://www.tundras.com/threads/trimming-front-bumper-liner-and-mudflaps.63755/
if i went with 35's, i would need to remove the mud flap, push the bumper forward 1/2" and maybe do the body mount chop.