Horn problems

Alright guys i cant get my horn working. Replaced them with new factory horns hoping for the best and no luck. I now have my steering wheel totally apart i jusy cant get it off to look at wires, clock spring etc. Any ideas how to get the steering wheel off or what,could be causing my problem?

 

Try this thread
https://www.tundras.com/posts/85281/

 

Didnt give me what i needed thanks though

 

The few threads I've read of people pulling off their steering wheel used a steering wheel pulling tool.

 

Ah figures i have to have a special tool ha. Thanks for the info on that, i mainly just wanted to see if my clock spring had a pinch in it

 

They're not too expensive. Usually like $15. You can probably rent one for free from Autozone.

 

I will definitely have to look into that, if i find anything ill update here. Thanks joon.

 

Yes i made sure to scrape he surfaces and make sure their clean.

 

Haha no your good. Yes i checked both though. My horn would work with the wheel turned 90 degrees left or right but nowhere else and now it doesnt work at all

 

Clock spring is bad.

 

I take it you had the same problem?

 

No.. I have diagnosed enough of them.. horn, air bag, steering wheel controls go-to shit.. not just Toyota ,GM ,ford, honda and Mercedes I have worked on.

I thing I tell people it holds true to my 95 Tacoma still has the original clock spring. Always always when parking the vehicle keep the steering wheel straight. That keeps the spring relaxed.

 

Oh gotcha. Well thanks for the input man, looks like ill be tearing into that next weekend.

 

Please disconnect the battery to do the airbag.. it's not hard you can rent a tool for puller for the wheel.

 

Ive already had the air bag out twice tryin to look at stuff haha. Just need to get the wheel puller.