2020 TRD PRO ~ Removing Dual climate panel

Hey friends.

Can someone please send me a great video that shows how to remove my dual climate control panel and also the one for the “push start” button?

I’m changing the knobs and haven’t found a really good one yet. Thanks!

 

The black piece below it need to be pried out first then you can pry out the climate panel. I think you just need a small pry tool.

 

The piece with all your USB plugs needs to come out first. Pry down, then pull straight out. The climate panel just pulls straight out.
On my Tundra, the panel where the break controller pops out with a pry tool, but I don't have push to start. Use a plastic pry tool, be gentle.

 

Thanks for the feedback everyone!

 

https://www.tundras.com/threads/dash-disassembly-and-removal.65269/

 

As others stated, pry the bottom center piece with a plastic pry tool.
Or stick your thumbs in the 12v plugs and pull it out.
The bottom piece and the climate control should come out as 1 piece.
After it is out, you can separate them.
No need to do anything to the console.



The little panel with your push start can be pulled 2 ways.
1. remove door sill, remove the kickplate, remove the two bolts that hold the bottom panel in, and remove that panel. Pull your panel out.
2. Just pry the top of the bottom panel back enough to pull the panel you need out.

 

This is great info, thank you!