Arb air compressor mount

Anyone know of a compressor mount that I could use for the arb dual compressor? I see @Bannock452 has one but it doesn’t look like it fits with the 2nd gen stock air intake. I’d like to find a solution that doesn’t involve buying a new air box.

 

https://www.victory4x4.com/product/VTU23AIR-PC.html

 

It seems to be very similar to bannocks. Did you install the victory mount?

 

Victory basically copied my design. Not sure how it will be any different as far as fitting the 2nd gen. There is very little room with the stock intake on the 2nd gen for the large twin compressor. Either way if your interested in a mount I have them in stock and ready to ship now. Still would need to find a 3rd gen airbox though. Just let me know and I’ll take care of you. Thanks!

 

thanks man! Would it fit with the single arb compressor and 2nd gen air intake?

 

Yes sir. The single compressor will bolt up and is small enough to clear the intake box. I’ve personally had both the single and twin compressor and both work really well. I was super impressed with the singles performance. Just my opinion anyways. Let me know what you decide. No rush and I have plenty of mounts in stock now.

 

sweet thank you!!

 

Do you happen to have any mounts that can accommodate a 1 gallon tank with it?
Got one on the FJ and love it.

 

Very cool

 

No mounts available for an added 1 gal tank. There’s barely room for the compressor in the tundra. But can always mount the tank somewhere else with some added plumbing. I’ve always wanted to add a tank but haven’t done that yet!

 

what exactly do you guys use the air compressor for? is it air bags?

 

Lockers or when you need to fill up your tires after an off roaring trip

 

Bannock452@ what price point are you selling your mount at? Were is the sale page?

 

Hey Tim!
Total price for the compressor mount is $125 shipped.
This was originally designed for the 3rd gen but later came to find out it also works with the 2nd gen with some small modifications if wanted to run the twin compressor. Single compressor bolts right up no problem. That’s why I haven’t posted anything to the 2nd gen pages.
Also I don’t have a website or anything but here is the post I made for the compressor mount previously. You can PM me anytime with any questions.
https://www.tundras.com/threads/bolt-in-on-board-air-compressor-mount.23769/

 

Some homemade parts and pieces so far seems to be holding up. Drilled out the factory fasteners to make room for some 3/8” bolts, nuts, couplers and some threaded rod. Used some scrap aluminum square tubing to cover and stabilize the threaded rod. It was a bit cumbersome to mount the compressor but it fits. I wish I could have used an aftermarket mount but exchange, shipping, brokerage and duty costs made it no longer cost effective. Maybe someday I’ll splurge for one.