What have you done to your 2.5 gen Tundra today?

Thanks man. All the info you need is in my build thread linked here

 

Loaded up the bike to hit the trails and explore the FSRs afterwards

 

4x4 switch chrome gone!

 

The state of NJ is now basically shut down except for essential businesses. I took advantage of being cooped up at home today and spent quality time with my Tundra. Replaced the front brake rotors and pads. Went with Wagner rotors and Wagner ceramic pads from RockAuto. Using ceramic to cut down on the amount of brake dust. After bedding the pads, I went for a spirited test drive. Stopping power felt just as good, if not, slightly better than pre-replacement.

 

Started the 38 gallon tank project, cross member is in!

 

Gave her a quick wash. She's not perfect but at least the salt is off while she's parked on the driveway for the next several weeks.

 

https://www.amp-research.com/amp-research-75309-01a-bedstep-rear-bumper-access

This is the one I have. They also have another version for the color matched bumpers.

 

I'm curious about what you had to cut to install it. I didn't need to cut anything for mine.

 

Heat/AC controls chrome gone!

 

Awesome pics!

you will notice it more on highway. Front sway bar tightens up the front suspension and rear sway bar Is more noticeable at cutting body roll

 

I like this, plan to do it to mine. Not a huge fan of the shape of the AJT cover, I like the smooth look.

 

I look it up pretty sweet ass TRUCK brother, I'm going to upgrade my lights to the 2018 Trd sports asap. Also I'm going to do a build thread as well soon. Thank for the link!!!

 

No prob man, let us know when your build thread is up! Thanks

 

Added a chase light to my taillight. Needs a little color match 8T5 paint, and I’ll rewrap the LED bars. The chase light has different strobe sequences to choose from. Gotta order one more and do the other side.

 

A write up on how you removed the lens from the tail light housing would be helpful to those of us that want to do some customizing. Looks great keep up the good work.

 

Check out the thread: Barcelona Red Retrofit. I created that thread a while ago. Headlights and tails are in that thread.

 

Blue LED cupholder lights, wired into the charger port in the center console using t-taps and male connectors to make removing the shifter console easy. Ordered (1) more BLUE LED for the third holder under the console, I think it will tie in nicely, the LED's emit a very soft glow @ night, to an otherwise dark
area of the interior. AccentGlowLED is the company that makes them, 2 7/8" fits the two cupholders next to the shifter, 3" fits the holder under the dash console.

 

Got a night shot with the dash lit up? I've debating on ordering either the blue ones or the white ones.

 

I'll have the 3rd LED light tomorrow, (due to C-19 I have a lot of extra time on my hands). I'll install and take night shots, I went with Blue and really like it, I dialed in the LED's on my android headunit to match the cupholder lights

 

Clean work across the board, I've been wanting to cut open my Anzo tails and do some subtle mods but can't seem to figure out where to start. I already painted the lens with a matte black trim ring so thats ready. I'm thinking reverse bowl Silver Sky Metallic, both reflectors Silver Sky or gloss black

 

Thanks! Flip that bad boy over, and using a dremel, cut through the first layer of plastic about 1/4” away from the edge. In the areas that the dremel disc doesn’t go through, I use a razor blade to separate the two halves.

 

@TundraCoast looks awesome! Question, what's this? On button for the LED's?

 

Did what would be considered a "boss" or "power" move, and washed my truck, then dried it with toilet paper. Neighbors weren't happy with me.

 

fumoto

$37 Original Fumoto F103N with LC-10 lever clip FN-Series Engine Oil Drain Valve, 1 Pack

https://www.amazon.com/gp/product/B07D9DXCHP/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

aluminum filter cap

$22 Toyota Genuine Parts - Cap Assy, Oil Filter (15620-31060)

https://www.amazon.com/gp/product/B008BHP68A/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

 

I went to my dad's shop on Friday, I did my oil change, tightened up/checked bolts on lift, then ran my rear diff breather line to behind my driver side tail light. I spent more time trying to find out where to run it so avoid rubbing on sharp edges and all. Very easy and glad I got it done with hurricane season coming.

 

Good eye John, that’s my subwoofer level control knob. I have the OEM Audio+ system. The sub level controls comes in this nice but bulky surface mount box so I stripped it out of that and did a “stealth” mount on the center console

Here is a pic of the “stock” sub level control



Close up of the sub level mounted

 

Love the "stealth" look, great job!! Might do that with my JBL amp's sub control knob...

 

You bled the system?

 

Yes. I bled the system.