Autoloc auto window up and down project

I hear the going rate for that is going up because demand is so high!!!!

 

I'm in!

 

Any word on price and installation requirements? Hopefully the installation instructions don't start with "First, disconnect the airbags and remove the dash structure." or "Not available for grade models."

 

price ?

 

Personally I don't care about auto closing.
But I'd love to be able to auto open the 4 windows of my 2014 SR5 without changing the window motors, which is what I've read to make it happen...
Even more if I can hook that up to my compustar remote start/alarm for 4 windows down, but I can do without that if needed.

 

Well it depends on which option you are going to go with but I will explain all of this soon. It is all Plug-N-Play just like all of my mods! We were just going over the pricing last night

 

Yeah you don't have to change your window motors at all

 

Man cant wait, then my truck can have features my 10 year old Honda has

 

If anyone is interested, I've updated my post to include the rear window. They wire up the same as the rear doors, but power needs to be brought to the module. I simply tapped into the power that is going to the rear door that was used to power the module for the door itself.

https://www.tundras.com/threads/autoloc-auto-window-up-and-down-project.41365/page-4#post-1658025

 

Has KTJO 4X4 confirmed to anyone that their PNP will have the rear window auto up/down included for Tundra? Also known as the back window not in the rear doors.

 

Hey Jamestada, Thanks for figuring this out, but my wires are different colors and wondered if you could take a pic of the back of the plug going to the rear window aka back window so we could see the corresponding wire colors and placement or could you update which side red and green on yours goes to in the plug ports. Thanks in advance.

 

I'd have to pull the rear reasts out to do this. And don't plan on doing that anytime soon...

But to test this here is what you've gotta do with a multimeter. Set to DC voltage and connect the ground to a known groun . I used the door latch on the truck.

Cut both wires, using the wires from the truck (not going to the motor) strip one back so you can set the positive lead to it. Turn on the truck to ON, you don't actually need to start it.

Push the down button. If the multimeter shows around 12v, that's the down wire. If it doesn't, it's the up wire. To confirmjust pull on the button and it should show 12v.

Hope that helps.

 

Yes. It will include all 5 windows! I have asked my vendors specifically this question

 

Thanks!

 

I feel like were going to get the pricing soon Cant wait.

 

Anybody familiar with these?

 

Interesting Can you tell us more?

 

@TUNDRAPROGUY2017
Yes that module is the one you need. It's all plug and play, only thing you need to do is run the red wire to a hot source. It plugs into driver side and you can use key fob to put windows up and down.

 

Damn more money to spend

 

https://3wliners.com/product-category/auto-accessory/

Use discount code 3WMARK10 for 10$ off


This will control all 4 window and will do auto up and down on all.

 

If your current driver window only goes auto down then get the "low" but if it goes auto up and down then you would need the "high" one.

 

but this is not the same thing as what @KTJO 4x4 is offering right ? This is a different product?

 

Can I assume it would work on a power rear sliding window?

 

not the same i want to wait and see how that one will work before I make a purchase.

 

Yes. My vendors talked to me about this guy. He is using the same product and kit as me but I will be adding some more features as well as I will have it so that if you want just the rear one-touch, which is just mine, you can have just that. He just wanted to sell the basic two packages. He also changed the name of it probably thinking that it wouldn’t get back to me. I also will be running mine with the add-a-circuit so you don’t have to go through your kick panel to your battery and it’s just right there. He wanted to quickly get a 100 kits and get it out on the market as you can see.

For pricing this is roughly what I was thinking:

Window Opener/Closer $80
Multi Window Function Auxiliary System $100
One Touch Auto Up/Down Harness $25-$35

 

When will this be available?

 

availability ?

 

I have placed my order and they are putting the 4Runners, Tundra, and Tacoma Kits together as we speak