Transmission Trouble Shooters

where have they all gone? I have great running 07 with 400k miles. Shifts fine but codes pop up. If there are any interested in helping me answer back and I’ll explain how I cheat the codes til transmission warms up . Most say I need a new transmission and I reply then why am I still driving it and it shift and drives fine?

I’m sure there’s a simple issue that will fix it so I don’t have to hold shifter knob til transmission warms up.
thanks.

 

What codes are popping up?

 

It is one of these I am betting.
Help the guy out

P0705 Transmission Range Sensor Circuit Malfunction (PRNDL Input)
P0710 Transmission Fluid Temperature Sensor Circuit
P0711 Transmission Fluid Temperature Sensor Circuit Range/Performance
P0712 Transmission Fluid Temperature Sensor Circuit Low Input
P0713 Transmission Fluid Temperature Sensor Circuit High Input
P0717 Input/Turbine Speed Sensor Circuit No Signal
P0722 Output Speed Sensor Circuit No Signal
P0729 Gear 6 Incorrect Ratio
P0746 Pressure Control Solenoid 'A' Performance or Stuck Off
P0748 Pressure Control Solenoid 'A' Electrical
P0751 Shift Solenoid 'A' Performance or Stuck Off
P0756 Shift Solenoid 'B' Performance or Stuck Off
P0761 Shift Solenoid 'C' Performance or Stuck Off
P0766 Shift Solenoid 'D' Performance or Stuck Off
P0771 Shift Solenoid 'E' Performance or Stuck Off
P0776 Pressure Control Solenoid 'B' Performance or Stuck Off
P0778 Pressure Control Solenoid 'B' Electrical
P0781 1-2 Shift
P0894 Transmission Component Slipping
P0973 Shift Solenoid “A” Control Circuit Low
P0974 Shift Solenoid “A” Control Circuit High
P0976 Shift Solenoid “B” Control Circuit Low
P0977 Shift Solenoid “B” Control Circuit High
P0985 Shift Solenoid “E” Control Circuit Low
P0986 Shift Solenoid “E” Control Circuit High
P2714 Pressure Control Solenoid ‘D’ Performance or Stuck Off
P2716 Pressure Control Solenoid ‘D’ Electrical
P2740 Transmission Fluid Temperature Sensor B Circuit
P2742 Transmission Fluid Temperature Sensor B Circuit Low
P2743 Transmission Fluid Temperature Sensor B Circuit High
P2757 Torque Converter Clutch Pressure Control Solenoid Ctrl Circuit Performance or Stuck Off
P2759 Torque Converter Clutch Pressure Control Solenoid Ctrl Circuit Electrical

 

P0705 & P0983. I just want to know why on a cold start the shift indicator does not light up unless I put forward pressure on shifter and hold it til transmission is up to operating temp. Then I shift to neutral and back to drive and light comes on like normal. If I don’t do anything on a cold start 4Lo light comes on and shortly after that all the other lights come on. Still drives normal up and down shifts are great. After about 7 ignition cycles all lights go out as long as transmission temp is at operation temp.

 

You need a new transmission.

 

400K miles? Like my smartass urologist said when I complained about resistant ED..."How long did you expect to have (fun)?"

 

But I want to know why? It works fine....

 

Could the "Park/Neutral" switch be going bad?

 

Well will that trigger the other code? Because that’s what happens