What have you done to your 2.5 gen Tundra today?

So I installed the TRD OEM LED headlights. Got them safe and fast from @Roman and used @iHacker harness. That is one quality harness. I had trouble with the grommet. Had to figure out how to get it through since it is in a awkward spot and made of really tuff rubber. It involved a 14 gauge copper wire, electrical tape and lube.

 

New "summer" tires went on today and went with Michelin Defender LTX M/S.

 

Update....

I WON! IT DIDNT SNOW!

 

She was dirty...


After a wash I always check the fluids. This little area in the washer fluid reservoir drives me nuts. It's open at the bottom, but sealed at the top. So when you fill it up, you get this area that doesn't fill because the air is trapped. Drive a few miles and it all evens out, but then it looks like you've already used 20% of the capacity. It's wasted space that you cannot fill and this kind of stuff tweaks my brain...


So today I fixed that problem. Drilled a small hole at the top and cleaned off the shavings. It's a little low. I'll drill a larger hole higher up this spring when it's warm and I have time to pull the reservoir out


Now things are balanced...you're welcome World.

 

Upgraded the Cooper STT PRO’s to nice and quiet Nitto Ridge Grapplers. Remounted the Cooper’s onto the stock TRD OR wheels.

 

Did TRD front sway bar and installed center console wireless charger kit.

 

What about drilling a hole in the black cap? Less chance of the bottle cracking down the road and the cap is cheaper to replace.

 

Nice set up. I have a tonneu cover, but I am trying to figure out a rack to go with it. Like your set up.

 

Took it to dealer (yeah I know...) for oil change, tire rotation, cabin filter change. Waited 2 hours, I'm super close to just doing it myself, but with no pull in garage kind of sucks in WI winters.

Proceeded to throw it in sequential, turn on tow/haul mode and took 'the long way home' with no music on. Just the sweet sweet sound of that V8 through my bamf exhaust.

Currently drinkin some beers while crankin tunes making dinner.

 

Little more audio work today. Taking it slow. Only one door left! Lol

 

Looks Awesome..love the height and stance

 

Thank you!...new wheels/tires are ordered and on the way, can’t wait!...I’ll be doing an update on my YouTube channel of the fitment and possible trimming if any is needed!...they should be here in a few days!

 

At least you have good taste in beer

 

Installed new rotors, painted the calipers while I was at it.

 

The cavity isn't under the black cap, it's another chamber. Have to drill thru the main chamber to let the air escape as you fill and so the waterline can rise. I can't imagine the hole will create a crack, the reservoir is built like a tank..

 

So this isn't anything directly related to my truck, but I repurposed something that's been in my garage forever. I used to ride this thing on the street but I'm old now and would probably kill myself if I tried using it. I wanted something that made mounting up the tires a little easier so I tried using my skateboard as a rolling lever to lift the tire up and roll it onto the studs without struggling. I can't be the first to discover this but good lord does it make things easier. Give it a try!!

 

I'm about to need to make something similiar to this with my new tires/wheels being 110#'s each. *think smarter, not harder* lol

 

Going with the 6" on 325/60R20(35.5x12.8R20) BFG KO2's 20X10 with -18 offset HardRock Painkillers

 

Damn that looks good.

 

Installed my TRD skid plate

 

Got any pictures of the CV angles by chance? I'm at 3.5" on the front and would like to see how mine compare. Thanks!

 

I've heard others struggled with the grommet as well. That was a piece of cake for me compared to trying to depin the wire under the dash. No matter what I couldn't get it to release - ended up winning the battle in the end, but that step wasn't easy for me.

 

What light bar mounting system is behind the grill and do you like the output? I’ve got a “bull bar” type mount for a 30” I’m not happy with.

 

I got this truck for Christmas from my wife, so these "upgrades" have been over the past several weeks (rims mounted today). But nobody wants 7 or 8 individual posts about the same truck!


wireless charger


large cup holder (because the regular ones are too dang small)



console tray organizer





Bak Industries Revolver x4 bed cover



TRD rear sway bar



Husky floor mats all the way 'round



N-Fab Podium steps



KMC 544 Mesa wheels(black machined w/ grey tint)


Now I think it's time to give the bank acct. a break! Until I need new tires..........

 

JBA UCAS, AJT Interior trim pieces.

 

https://heiseled.com/product/HE-HDR32

Silly bright and I'm happy with it. Pricy too but worth it

 

Had some free time today for a change.



AJT climate control knobs and trim rings
Meso 4x4 trim ring


TRD PRO dash pad with AJT vent rings



AJT vent ring & Tuffskinz instrument cluster trim.



Didn't do the radio bezel vent rings yet because I want to paint it black when it warms up.

 

Well look at you, Genius

 

Like the gauge trim were did you find that