What are the 2 empty plugs attached to fog light wiring?

Installed an ARB bumper over the course of the last couple days and when I plugged the fog lights back up I noticed an extra plug on each of my fog lights. Is this something from the factory?

Also, one of my H10 locking clips broke and I need a new plug. Anybody know of a well made replacement?

 

Got a couple pics. First one is passenger side and second is driver side.

 

Could those be for the front parking sensors?

 

Not likely if his Tundra is an 07.

 

This truck did have a couple front end collisions and the bumper was certainly replaced at some point. Still cant imagine what they could be especially since both are different.

 

did 07 ever have auto leveling options for headlights?

 

From my research in the past, that is the factory plug for the fog lights. Did your oem bumper not have fogs?

 

H10

$10 Winka 9005 HB3 H10 Socket Male and Female Adapter Fog Light 4pcs

https://www.amazon.com/Winka-Socket...r_1_3?keywords=h10+plug&qid=1581809624&sr=8-3

$8 UTSAUTO 2Set 9005 9006 H10 Wire Connectors Female & Male Adapter Wiring Harness Sockets Wire 12V for Headlights Fog Lights

https://www.amazon.com/UTSAUTO-Conn...1_13?keywords=h10+plug&qid=1581809696&sr=8-13

 

Mine has this too!

 

Yes my OEM bumper had fogs. The wires hanging down that the plugs are attached to are the fog light wires which are plugged in place.

 

i think those plugs are for parking sensors

 

https://youtu.be/OQiFLtb-mnU

1:50? That is what I was thinking but I don’t really know for sure.

 

Im not convinced they are both parking sensor connectors. One side looks completely different from the other. Also the connector wiring is super short.

 

I thought it looked similar but nothing ever looks the same. What color are the plugs, how many wires and what color are the wires? I could try matching your descriptions with the wiring diagrams.

 

I got some pics of the wire colors today

 

The auto leveling connector is a triangle shape.

 

Nice photos. I'm having trouble finding some of the diagrams that I first found to cross reference. It'll take me some time when I have a chance to get a break from work.

 

Yes the triangle shaped one is headlight level control. I'm having trouble finding the other one. I need a better photo of the plug with the pins visible. I can't really tell how many wires come out of it either.

 

Its raining hard here today and my work week starts tomorrow but ill try to remember to snap that pic

 

No rush if you're not.

 

So the rain let up and I decided to go ahead and do a coolant drain and fill. While I was there I snapped a couple more photos and I hope this is what you needed to see.

 

Let me see what I can with those and maybe I'll have an answer tomorrow.

 

my plugs looked like this next to the fog light plugs.

 

Wow those are some clean plugs!

 

thanks? I haven't done anything special but it is a low mile 2007 with 40,400mi
if someone needs to see wire colors I took these this morning. it easy for me to take pictures right now because I have my front bumper off to get de-chromed and painted.

 

So here's what I figured out. It looks like those plugs are for the parking assist ultrasonic sensors.

 

That leaves no doubt. Thanks for looking in to that. Your knowledge is much appreciated.

 

You're welcome. I'm just passing forward the favor. I've received some help on this site too. I know I'll be asking for more advice in the future.

 

Just a heads up for the 2nd gen Tundras im not sure with tundra grade but atleast staring with SR5 and up have all the wiring for the options its just a matter of adding the option in the oem spot ..